- Online only
This hybrid turbo for engine variants 1.9 TDI offers in-house programmes tailored to different objectives. The three levels on offer all use an MFS compressor wheel Performance, a 360° bearing stop and high-speed balancing on a Cimat VSR test bench.
The documented assignments relate in particular to certain Audi A4 and A6, Skoda Superb and Volkswagen Passat. The benchmark for turbochargers dThe origin must be verified before any order is placed.
This preparation acts primarily on the compressor wheel in order to d’adjust the travel capacity’ d’air, whilst retaining the characteristics specific to this level of preparation.
The wheel with the larger diameter is fitted here d’a re-profiling of the casing d’admission’. This assembly is designed to alter the compression capacity and flow rate d’air under the conditions specified in the preparation.
This stage uses the largest compressor wheel of the three documented configurations. An increase in size may affect the potential flow rate, response time and range d’Optimal use of the turbocharger’.
A hybrid turbo is based on a specially adapted turbocharger design for to receive internal components or machined parts that differ from the specification d’origin’. Depending on the modification, changes may relate to the compressor impeller, its dimensions, the geometry of the blades, the casings, the turbine impeller, the thrust bearing or the balancing.
The aim is d’adjust the compression capacity and flow rate’ dair. A hybrid turbocharger is therefore not defined solely by the appearance of its compressor wheel: the coherence of the mechanical assembly as a whole and its integration with the engine management system are essential.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This term describes a manufacturing process and, on its own, is not sufficient to establish an increase in throughput dair.
A standard MFS wheel can retain a geometry equivalent to that d’origin’. An MFS wheel Performance may have a specific blade profile, diameter or configuration tailored to the preparation objective, such as the documented dimensions and configurations for the three stages of this product.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more dair. A higher flow rate can enable the engine to produce more power when combined with a correctly sized engine upgrade.
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour and the amount dthe volume of air it can displace under certain conditions.
The result also depends on the compressor housing, the impeller and the turbine housing, the boost pressure and the engine tuning. A larger wheel is not necessarily suitable for all uses and may affect the turbo’s response time.
The 360° stop fitted to each stage distributes the axial forces around the axis. It helps to adapt the bearing to the stresses of the preparation process, without replacing proper lubrication or correct assembly.
The rotor is balanced at high speed, up to 150,000 rpm, on a Cimat VSR test bench. This procedure is designed to minimise vibrations and mechanical stresses, but does not compensate for a fault doil supply, contamination or incorrect installation.
The engine mapping and boost pressure control need to be adjusted for make the most of the hybrid turbo’s features. Depending on the level of preparation, injection, fuel supply and air cooling dThe intake, exhaust, clutch or transmission must also be checked or adjusted. The wastegate must be adjusted during installation and when the ECU is reprogrammed.
Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, as well as the supply and return lines doil. Check that the ducts and the intake are clean and free from foreign objects. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions.
Engine management, boost pressure and wastegate settings must be adjusted to suit the selected tuning package. If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
Check the part number engraved or marked on the turbocharger dthe original, then compare it with the OEM and manufacturer’s part numbers listed on this sheet. Also check the make, model, generation, body style, engine type and power output in hp, the assembly period and the engine code, where available.
Before placing your order, Compare the part number on your turbocharger d’origin’ using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you are in any doubt, please contact us with the full reference number of your turbocharger dVehicle origin and details.
Reference: AG15-333
Brand: ALFI TURBO ///
Year: August 1996 to June 2008, depending on assignmentPower: 90, 101, 105, 115 and 116 hp, depending on applicationdisplacement: 1,896 cm³Engine code: Not specifiedWarranty: 2 years
Reference: ACG-056
Brand: ALFI TURBO ///
Year: From 1998Power: 90, 100, 105, 110, 115 and 116 hp depending on allocationdisplacement: 1,., 9 LEngine code: Not specifiedWarranty: 2 years
Reference: wast
Brand: ALFI TURBO ///
Pneumatic control (wastegate) for turbo GARRETT HIH MHI KKK Toyota Brand new with a 2-year warranty. After placing your order, please let us know the exact part number of your turbo!
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO