- Online only
This hybrid turbo for engine 1.4 TDI 75 hp offers three distinct levels of preparation. Each configuration uses a high-flow MFS compressor wheel, a 360° bearing stop and high-speed balancing on a Cimat VSR bench.
The documented assignments relate in particular to Audi A2, SEAT Arosa, Córdoba and Ibiza, Skoda Fabia and Volkswagen Lupo and Polo models fitted with the engine codes listed in this specification sheet.
This design is based on an MFS impeller with a high-flow geometry. It aims to adjust travel capacity d'air whilst retaining a configuration that is less oversized than the other two courses.
The larger diameter requires the casing to be re-profiled d'admission'. This combination may increase flow capacity, but its operation depends on the engine management system and the overall mechanical configuration.
This version has the largest wheel of the three documented configurations. Such a change may affect the available flow rate, response time and optimal operating range; it must therefore be selected in accordance with the motor design.
A hybrid turbo utilises a turbocharger design that has been adapted to accommodate modified internal components. Depending on the specific design, modifications may relate to the compressor impeller, its geometry, its dimensions, the casings, the turbine impeller, the thrust bearing system or the balancing.
The aim is d'adjust the compression capacity and flow rate' d'air'. However, a hybrid turbo is not defined solely by the appearance of its impeller: the dimensions, geometry and overall balance are crucial.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in throughput d'air'. A standard MFS wheel can retain a geometry equivalent to that d'origin'.
An MFS wheel Performance can be designed with a geometry suited to the intended application: specific blade profile, dimensions or configuration, depending on the available technical data. A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air'.
A higher flow rate can help to increase power output when the engine management system and peripheral equipment are correctly configured, although this does not in itself guarantee a gain in power.
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of its blades all influence its aerodynamic behaviour. The right geometry can move more d'air under certain operating conditions'.
The result also depends on the compressor housing, the impeller and the turbine housing, the boost pressure and the engine tuning. A larger wheel therefore does not automatically lead to a better result and may affect the response time.
The 360° stop, documented in each stage, helps to distribute the axial forces within the turbocharger. Rotor balancing minimises vibrations and mechanical stresses at very high speeds.
All three configurations are balanced at 150,000 rpm on a Cimat VSR test bench. However, this balancing does not compensate for incorrect installation, insufficient lubrication or the presence of foreign objects.
It may be necessary to adjust the mapping and management of boost pressure for make the most of the hybrid turbo’s features. The wastegate must be adjusted during the installation and remapping of the ECU.
Depending on the level of preparation, it is also advisable to check whether or d'adjust the fuel injection, exhaust and air cooling' d'the intake, the clutch and the transmission'. The editing d'A hybrid turbo does not automatically deliver a performance gain without appropriate engine tuning'.
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Identify and rectify the cause of the previous fault before d'fit the turbo'.
Check the lubrication circuit, the supply and the return d'the oil and the cleanliness of all the pipes'. Also check the intake and ensure there are no foreign objects present.
Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions. Wastegate adjustment and mapping should be carried out by a qualified professional.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
Check the part number engraved on the turbocharger d'origin', then compare the OEM and manufacturer part numbers. Also check the make, model, generation, body style, engine type and power output of 75 hp, the installation dates and the engine code.
Having the same engine is not always enough to confirm compatibility, as there may be several different configurations within the same range of vehicles.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d'origin' using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you are unsure about which service package to choose, please contact us with the full reference number for your turbocharger d'origin'.
Reference: AG15-010
Brand: ALFI TURBO ///
Year: From 1999 Power: 75 hp Engine: 1.4 TDI Engine code: AMF Warranty: 2 years No deposit required, no need to return the old turbo.
Reference: joints
Brand: ALFI TURBO ///
for Complete Gasket Set – for fitting your turbo.
Reference: ACG-357
Brand: ALFI TURBO ///
Year: From 1999 onwards, depending on the vehiclePower: 75 hpdisplacement: 1,.,4 TDIEngine code: Not specifiedWarranty: 2 years
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO