- Online only
This hybrid turbo for engine options 2.0 HDI features specific internal modifications designed to adjust the compression capacity and flow rate dair. The three documented levels incorporate an MFS compressor wheel Performance, a 360° bearing stop and high-speed balancing on a Cimat VSR test bench.
The deployments involve, in particular, several vehicles Citroën, , Fiat, , Lancia and Peugeot. The benchmark for turbochargers dThe origin must be verified before any order is placed.
This model features an MFS wheel Performance with documented dimensions so that dto adjust the compressor’s behaviour and its ability to move air. The result also depends on the engine management system and the vehicle’s other components.
The enlarged diameter and the re-profiling of the casing d’admission requirements allow’ d’fit the wheel’ oversized. This change may affect the flow rate d’air flow and turbocharger response depending on the settings and conditions dUse.
This version features the largest documented compressor wheel for this product, with a casing d’adapted admission’. However, a larger wheel alone does not guarantee better performance in all conditions and may affect response time.
A hybrid turbo is based on a specially adapted turbocharger design for to receive internal changes. Depending on the specific application, these may relate to the compressor impeller, its dimensions and the geometry of its blades, the casings, the turbine impeller, the thrust bearing system or the balancing process.
The aim is d’adjust the compression capacity and flow rate’ dair. A hybrid turbocharger is therefore not defined solely by the appearance of its compressor wheel: the consistency between the components, the machining and the settings is crucial.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This term describes a manufacturing process and does not, in itself, guarantee an increase in throughput dair.
A standard MFS wheel can retain a geometry equivalent to that d’origin’. An MFS wheel Performance may have a diameter, profile or blade configuration suited to the preparation objective, such as the configurations documented for the three stages of this product.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more dair. A higher flow rate can help to generate more power when the engine has been properly tuned, although this alone does not guarantee results.
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of the blades all influence its aerodynamic behaviour. The right geometry can move more dair under certain conditions, but the result also depends on the casings, the turbine wheel, the boost pressure and the engine tuning. An increase in size may also affect the response time and the range doptimal use.
The 360° stop fitted to each stage helps to distribute the axial forces acting on the rotating assembly. It does not exempt d’proper lubrication or compliance with the installation requirements.
Rotor balancing reduces vibrations and mechanical stresses at high speeds. For this product, balancing is carried out at 150,000 rpm on a Cimat VSR test bench. This operation does not protect against a fault dthe oil supply, the presence da foreign object or incorrect installation.
It may be necessary to adjust the engine management system for make the most of the hybrid turbo’s features. Mapping, boost pressure, fuel injection, air cooling d’The intake, exhaust and, depending on the vehicle, the transmission must be checked or adjusted’. The wastegate must be adjusted during installation and when the ECU is reprogrammed. No increase in power happens automatically without proper preparation.
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Identify and rectify the cause of the previous fault before d’fit the turbo’. Check the lubrication circuit, the supply and the return d’the oil and the cleanliness of all the pipes’.
Check the intake and exhaust systems and ensure there are no foreign objects present. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions.
Fuel injection, cooling, exhaust, engine management and wastegate adjustment must be tailored to the chosen level of tuning.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
Compare the turbo part number d’original version with the OEM and manufacturer’s details for this data sheet. Also check the make, model, generation, body style, engine type and power output in hp, the assembly period and the engine code. Having the same motor does not always guarantee compatibility.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d’origin’ using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If in doubt, please contact us with the part number shown on your turbocharger so that we can check that it is the correct one.
Reference: ACG-182
Brand: ALFI TURBO ///
Year: From 1995 onwards, depending on the vehiclePower: 95, 107, 108, 109 and 110 hpdisplacement: 2.0Engine code: Not specifiedWarranty: 2 years
Reference: wast
Brand: ALFI TURBO ///
Pneumatic control (wastegate) for turbo GARRETT HIH MHI KKK Toyota Brand new with a 2-year warranty. After placing your order, please let us know the exact part number of your turbo!
Reference: joints
Brand: ALFI TURBO ///
for Complete Gasket Set – for fitting your turbo.
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO