- Online only
This hybrid turbocharger, designed for engines Hyundai and Kia 1.The 7 CRDi D4FD has been fitted with a specially designed internal modification for adjust its compression capacity and flow rate dair. Depending on the model selected, it features an MFS compressor wheel Performance with specific dimensions, a 360° stop and high-speed balancing.
In particular, it affects certain versions of the Hyundai the i40 and ix35, as well as Kia Optima and Sportage III. It is designed to be fitted without any external modifications, subject to verification of the specifications and any adjustments required for the vehicle’s configuration.
This preparation retains the documented dimensions for the Stage 1 whilst fitting an MFS wheel Performance. Its geometry is designed to optimise airflow, although no specific increase in power can be deduced from this modification alone.
The Stage 2 incorporates a compressor wheel oversized to a casing d’re-profiled intake’. This adaptation may increase mobility dair under certain conditions, but it can also alter the turbocharger’s response and requires consistent tuning.
The Stage 2+ uses the largest compressor wheel on record for this product, with a casing d’an inlet suited to its dimensions’. This configuration is designed to achieve a higher flow rate, but its performance depends on the engine as a whole, the settings and the operating conditions dUse.
A hybrid turbo is based on a turbocharger design that has been adapted to accommodate internal components that differ from the standard configuration d’origin’. Depending on the modification, changes may relate to the compressor wheel, its dimensions, the geometry of its blades, the machining of the casings, the thrust bearing or d’other parts of the rotor’.
The aim is d’adjust the compression capacity and flow rate’ d’air to meet the requirements of engine preparation. Not all possible modifications are always available: only the features listed for The terms and conditions for each course apply to this product.
A hybrid turbocharger is therefore not defined solely by the appearance of its impeller. Consistency between the geometry of the components, the casings, the balancing and the engine management system remains crucial.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This term describes a manufacturing process and does not, in itself, guarantee an increase in throughput dair.
A standard MFS wheel can retain a geometry equivalent to that d’origin’. An MFS wheel Performance may adopt a geometry that corresponds to the intended purpose, for example a specific profile, diameter or blade configuration, where these elements are documented.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more dair. A higher flow rate can help to generate more power when the engine has been tuned and the associated components are suitable, although this does not in itself guarantee a performance gain.
The compressor wheel draws in air and then compresses it before it enters the engine. Its diameter, profile, height, width and the arrangement of the blades influence the aerodynamic behaviour of the compressor and the quantity dthe volume of air it can move within certain operating ranges.
The result also depends on the compressor housing, the impeller and the turbine housing, the boost pressure and the engine tuning. A larger wheel does not automatically guarantee better performance in all conditions: it can also affect response time and range doptimal use.
The 360° stop fitted to all three stages helps to distribute the axial forces acting on the rotating assembly. It helps to adapt the turbocharger to the stresses of tuning, without making it immune to lubrication or fitting faults.
Every work placement offers d’high-speed balancing at 150,000 rpm on a Cimat VSR test bench. The aim of this operation is to minimise vibrations and mechanical stresses on the rotor. However, it does not replace either the priming or the circuit check d’oil, nor compliance with the assembly instructions.
Making the most of features dA hybrid turbo may require adjustments to the engine mapping and boost pressure control. The wastegate must be adjusted during the installation and tuning of the ECU.
Depending on the level of preparation, it is also advisable to check or d’adjust the fuel supply, the exhaust system and the air cooling’ dthe intake system, the engine cooling system, and the clutch or gearbox. A hybrid turbo does not automatically guarantee a power boost without the right set-up.
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Identify and rectify the cause of the previous fault before d’fit the turbo’. Check the lubrication circuit, the supply and the return d’the oil and the cleanliness of all the pipes’.
Check the intake, ensure there are no foreign objects and check the condition of the associated components. Carry out the priming in accordance with the relevant guidelines and follow the vehicle manufacturer’s instructions.
The wastegate adjustment and ECU tuning must be carried out in line with the chosen course and the engine configuration.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
First of all, check the part number marked on the turbocharger d…the original and compare it with the OEM and manufacturer’s specifications in this data sheet. Also check the make, model, generation, body style, engine type and power output in hp, the assembly period and the engine code.
An identical engine does not always guarantee compatibility, as there may be several different configurations depending on the version or production period.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d’origin’ using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you are unsure about the identification or fitment, please contact us with the full part number for the turbocharger dVehicle origin and details.
Reference: GX14-300-E86
Year: September 2010 to May 2019, depending on the vehiclePower: 115, 116 and 136 hp, according to documented datadisplacement: 1,.,7 lEngine code: D4FDWarranty: 2 years
Reference: ACG-588
Brand: ALFI TURBO ///
Year: From 2010Power: 115, 116, 136, 140 and 141 hp depending on designation and allocationsdisplacement: 1.6 CRDI in the designation; assignments documented in 1.7 CRDIEngine code: Not specifiedWarranty: 2 years
Reference: AG14-097
Brand: ALFI TURBO ///
Year: Documented start dates of installation from September 2010 to May 2015, by locationPower: 116, 136 and 141 hp depending on assignmentdisplacement: Not specifiedEngine code: D4FDWarranty: 2 years
Reference: HYB-AG14-097
Brand: ALFI TURBO ///
Year: September 2010 to May 2019Power: 115/116 and 136 hpdisplacement: 1.7 CRDiEngine code: D4FD
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO