- Online only
This hybrid turbocharger, designed for the X5 E53 diesel Bmw, is available in three documented specification levels.. Each version utilises a high-flow MFS Performance compressor wheel, a 360° bearing retainer and high-speed balancing carried out on a Cimat VSR test bench.
The identified applications relate to the X5 E53 models with chassis numbers Bmw, 211 hp and 218 hp, fitted with the M57 D30 (306D2) engine, for manufactured between dOctober 2003 and September 2006.
This set-up utilises an MFS Performance impeller, the dimensions and blade configuration of which are optimised for an increased air flow rate d. Its final performance depends on the engine management system and the overall mechanical configuration.
d d’ intake casing has been re-profiled here to accommodate the new compressor impeller This combination may alter the compression capacity and air flow rate , though it does not, on its own, guarantee a specific engine power output. d.
This version is distinguished by its specific dimensions and its 10+0 blade configuration. An impeller of different dimensions can alter the flow rate and response time; the choice must therefore be consistent with the intended use and the overall engine set-up.
A hybrid turbo is based on a turbocharger architecture adapted to accommodate modified internal components. Depending on the engine set-up, these changes may relate to the compressor wheel, its geometry, its dimensions, the machining of the housings, the thrust bearing or the balancing.
The aim is dto adapt the compression capacity and the air flow rate d. However, a hybrid turbo is not defined solely by the appearance of its compressor wheel: consistency between the components and the quality of the mechanical adaptation remain essential.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This term describes a manufacturing process and does not, in itself, guarantee an increase in air flow d.
A standard MFS impeller may retain a geometry equivalent to the original. An MFS Performance impeller may, where the technical specifications allow, adopt a diameter, profile or blade configuration suited to the intended modification.
A standard MFS impeller can be just as efficient as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d’air. A higher airflow can go hand in hand with an increase in power when the engine tuning is correctly adapted.
The compressor impeller draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour and the volume dof air displaced under certain operating conditions.
The result also depends on the compressor housing, the turbine section, the boost pressure and the engine management system. A larger impeller therefore does not automatically guarantee better performance and may alter the response time as well as the range dof optimal operation.
The 360° thrust bearing, documented across all three stages, helps to distribute axial forces around the bearing. It does not, however, eliminate the need dfor a lubrication system in perfect working order, nor dfor correct installation.
The rotor is balanced at high speed, up to 150,000 rpm, on a Cimat VSR test bench. This operation aims to minimise vibrations and mechanical stresses, but does not protect the turbocharger against lubrication failure, contamination or incorrect installation.
Adjustments to the engine management system may be necessary for to make the most of the hybrid turbo’s characteristics. The mapping, boost pressure, fuel supply, intake air cooling d, exhaust and transmission must be checked according to the level of tuning.
The wastegate must be adjusted during installation and when fine-tuning the mapping. The hybrid turbo does not automatically guarantee a power gain without appropriate engine configuration.
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault before d’install the turbo.
Check the lubrication circuit, the oil supply and return lines, and ensure all pipes are clean d.
Check the intake and ensure that no foreign objects can reach the turbocharger. Carry out the priming procedure in accordance with the applicable recommendations and follow the manufacturer’s instructions.
Unresolved lubrication issues may lead to further turbocharger failure.
Check the part number engraved or marked on the original turbo d, then compare it with the OEM and manufacturer part numbers in this data sheet.. Also check the make, model, generation, engine type, power output at hp, production period and engine code. An identical engine type is not always sufficient to confirm compatibility.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original dturbo with the part numbers listed in this specification sheet. An identical engine specification does not always guarantee compatibility.
If in doubt, please contact us with the full part number of your turbocharger.
Reference: AG22-258
Brand: ALFI TURBO ///
Year: October 2003 – September 2006Power: 211 hp / 218 hpdisplacement: Not specifiedEngine code: M57 D30 (306D2)Warranty: 2 years
Reference: ACG-328
Brand: ALFI TURBO ///
Central cartridge Cartridge for Bmw X5 E53 diesel fitted with the M57 D30 (306D2) engine, in the 211 hp and 218 hp versions, manufactured from October 2003 to September 2006. displacement : not specified. Warranty: 2 years.
Reference: 1914-016-096
Brand: ALFI TURBO ///
Vehicle model:530D E60, 730D, X5 Turbo part number:742730 Bmw reference : 11427785855
Reference: 2092-020-010
Brand: ALFI TURBO ///
742730-4, 725364-4, 742417-1, 753392-2, 750080-13, 728989-4, 712541-1, 758352-1, 765985-2, 758351-19, 765985-10, 758353-5, OEM: 11127799225
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO