This hybrid turbo is designed for for installation plug & play without any modifications to the original assembly d. It is tuned to optimise air flow dusing a forged aluminium MFS compressor wheel and internal modifications tailored to the selected performance package.
Stage 1: high-flow MFS compressor impeller, 360° bearing stop and high-speed balancing at 150,000 rpm on a Cimat VSR test bench. Stage 2: high-flow MFS compressor wheel oversized, with a reprofiled intake housing d, 360° bearing stop and Cimat VSR balancing. Stage 3: preparation of the Stage 2, supplemented by a high-flow turbine wheel oversized and a reprofiled turbine housing.
MFS stands for ‘Milled From Solid’, meaning an impeller machined from a solid block. A standard MFS impeller can be just as shiny as an MFS impeller Performance: it is not its appearance that determines its performance, but its geometry and its ability to move more dair. The 360° thrust bearing helps to distribute axial forces more evenly, whilst rotor balancing limits vibrations and mechanical stresses.
Appropriate engine remapping is required for to make the most of the tuning’s characteristics. Fuel injection, exhaust, cooling and boost pressure management must be controlled or adjusted according to the vehicle’s configuration. The wastegate must be adjusted during remapping.
OEM part numbers: 28200-4A200, 28200-42540, 2820042540, 282004A200, MD194845, MR355225.
Manufacturer part numbers: 730640-0001, 730640-0002, 730640-1, 730640-2, 49135-04020, 49135-04021, 49177-02512, 49177-02513, 49177-07612.
Documented allocations: Hyundai Galloper 2.5 TD 100 from 1999; Galloper Exceed 2.5 TD 100 from 2000 onwards. Before placing an order, compare the part number marked on the original d’ turbocharger with those listed on this sheet.