- Online only
This hybrid turbo plug & play is designed for Audi A4 B6 models fitted with the 2.0 TDI engine producing 163 or 170 hp. The tuning packages on offer combine an MFS compressor wheel Performance, a 360° bearing retainer and high-speed balancing.
Three levels of configuration are documented to dadapt the compressor geometry and its air flow capacity dto the requirements of the engine configuration.
This setup uses an MFS Performance impeller, the geometry of which is designed to match the air flow rate dof the compressor. The final performance depends on the engine management system and all associated components.
oversized ’s turbine wheel and the reprofiling of the intake casing denable dthe air passage dto be adapted to this geometry. A larger turbine wheel may alter the turbo’s response and must be integrated into a coherent engine tuning programme.
This version is fitted with the largest compressor wheel documented in this specification sheet, as well as a reprofiled intake d. Its operation requires a suitable configuration; the final power output cannot be deduced from the wheel’s dimensions alone.
A hybrid turbo is based on a turbocharger architecture adapted for accommodate internal components or machining that differ from the original configuration d. Depending on the modification, changes may involve the compressor wheel, its geometry, its dimensions, the housings, the turbine wheel, the thrust bearing system or the balancing.
The aim is dto adapt the compression capacity and air flow dto the requirements of the tuned engine. However, a hybrid turbo is not defined solely by the appearance of its compressor wheel: consistency between the components, machining and engine management remains essential.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This term describes its manufacturing process, but does not in itself guarantee an increase in air flow d.
A standard MFS impeller may retain a geometry equivalent to that of the ori d. An MFS Performance impeller may, depending on its design, utilise a profile, diameter or blade configuration tailored to the tuning objective.
A standard MFS impeller can be just as glossy as a Performance MFS impeller. It is not its appearance that determines its performance, but its geometry and its ability to move more dair. A higher airflow can contribute to power output when the engine tuning and peripheral components are correctly matched.
The compressor impeller draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and blade arrangement influence its aerodynamic behaviour and the amount dof air it can move under certain conditions.
The result also depends on the compressor housing, the impeller and the turbine housing, the boost pressure and the engine mapping. A larger impeller therefore does not automatically guarantee better performance and may alter the response time as well as the range dof optimal operation.
All three upgrades feature da 360° bearing stop, designed for better distribute the axial forces exerted on the rotating assembly. Its presence does not dreplace the need for proper lubrication or dcorrect installation.
The rotor is balanced at high speed, up to 150,000 rpm, on a Cimat VSR test bench. This process is designed to minimise vibrations and mechanical stresses, but does not protect the turbocharger against a lack doil, contamination or incorrect installation.
The engine management system must be adapted for to make the most of the hybrid turbo’s characteristics. The mapping, boost pressure and wastegate settings must be checked during fitting and remapping.
Depending on the level of tuning, the fuel injection, exhaust system, air- dintake cooling, clutch or gearbox may also require checking or adjustment. Simply fitting da hybrid turbo does not automatically guarantee a performance gain without appropriate engine configuration.
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the oil supply and return das well as the cleanliness of the pipes.
Check the intake for any foreign objects. Prime the system in accordance with the applicable recommendations and follow the vehicle manufacturer’s instructions.
The wastegate setting must be checked during installation and when reprogramming the ECU.
An uncorrected lubrication fault may lead to further turbocharger failure.
Check the part number engraved or marked on the original turbo d, then compare it with the OEM and manufacturer part numbers in this data sheet.. Also check the make, model, generation, engine type 2.0 TDI , power output hp, theYear and the engine code where available.
An identical engine specification does not always guarantee compatibility, as there may be several different mounting configurations.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this data sheet. An identical engine specification does not always guarantee compatibility.
If you are unsure about your specific fitment, please contact us with the full part number of your original turbo d.
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO