- Online only
This hybrid turbocharger, designed for the following engines: Mitsubishi 1.8 DI-D 150 hp, combines a high-flow MFS compressor wheel Performance with a 360° bearing retainer.. Three specification levels are available to dadapt the turbocharger’s characteristics to the engine project.
Documented applications include the Mitsubishi ASX and Lancer produced between June 2010 and December 2015. Installation is designed to require no external modifications, subject to checking the part numbers and carrying out the necessary adjustments.
This modification alters the compressor impeller to dadapt the flow rate dto the air, whilst retaining the mechanical characteristics specific to this stage.
The Stage 2 combines a larger impeller with a reprofiled intake casing d. This combination is designed to optimise airflow and compression, with performance depending on the engine’s overall configuration.
The Stage 2+ uses a larger compressor impeller and a modified intake dhousing. A larger impeller alone does not guarantee better performance: the result depends on the tuning and the overall set-up.
A hybrid turbo is based on a turbocharger architecture adapted for to accommodate internal components that differ from the original configuration d. Depending on the upgrade stage, modifications may involve the compressor wheel, its dimensions, the geometry of the blades, the intake housing d, the thrust bearing and the balancing.
The aim is d’to adapt the compression capacity and air flow d’to the requirements of the engine project. A hybrid turbo is not defined solely by the appearance of its impeller: consistency between the components, machining and settings is crucial.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in air flow d. A standard MFS wheel can retain a geometry equivalent to that dof the original.
An MFS impeller Performance can be given a geometry tailored to the tuning objective, in particular a specific diameter, profile or blade configuration. A standard MFS impeller can be just as shiny as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d’air.
A higher airflow rate can help generate more power when the engine is suitably tuned, though it does not in itself guarantee a power gain.
The supercharger impeller draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour. A suitable geometry can move more dair under certain operating conditions.
The result also depends on the compressor housing, the turbine section, the boost pressure and the engine set-up. Increasing the dimensions can alter the response time as well as the range dof optimal operation.
The 360° stop present on all three stages helps to distribute the axial forces exerted on the rotating assembly. It does not replace d’proper lubrication or d’correct installation.
Each engine preparation undergo dhigh-speed balancing at 150,000 rpm on a Cimat VSR test bench. This process aims to minimise vibrations and mechanical stresses on the rotor, without compensating for any faults in assembly, lubrication or dthe oil supply.
Appropriate engine management may be required for to make the most of the hybrid turbo’s characteristics. Depending on the tuning package and the vehicle, it is advisable to check or d’adjust the mapping, boost pressure, fuel injection, exhaust system, intake air cooling dand other components under load.
The wastegate must be adjusted during installation and when reprogramming the ECU. A hybrid turbo does not automatically guarantee a power gain without appropriate preparation.
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the oil supply and return d, the cleanliness of the pipes, as well as the intake and ensure there are no foreign objects.
Carry out priming in accordance with the applicable recommendations and follow the manufacturer’s instructions. The wastegate must be adjusted during fitting and remapping.
An uncorrected lubrication fault may result in the turbocharger failing again.
Check the turbo’s part number d– the original, OEM and manufacturer’s part numbers, as well as the model, engine type 1.8 DI-D, power output 150 hp and installation period.. The generation, body style and engine code must also be compared where available.
An identical engine specification does not always guarantee compatibility between two set-ups.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this data sheet. An identical engine specification does not always guarantee compatibility.
If you are unsure about the identification or fitment, please contact us before ordering.
Reference: MX35-300-1001
Brand: MHI
Year: From June 2010, end date unspecifiedPower: 150 hpdisplacement: 1,798 cm³Engine code: Not specifiedWarranty: 2 years
Reference: AM35-185
Brand: ALFI TURBO ///
Year: From June 2010, end date unspecifiedPower: 150 hpdisplacement: 1,798 cm³Engine code: Not specifiedWarranty: 2 years
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO