- Online only
This hybrid turbocharger, designed for the Nissan Patrol and Patrol GR 2.8 TD, is available in three performance levels. Each stage combines a high-flow MFS compressor wheel Performance with a 360° bearing retainer and high-speed balancing.
The available configurations allow you to select a setup suited to the engine project, without specifying a final power output. The documented applications relate to the 90 hp and 115 hp versions from 1988 onwards.
This set-up is based on an MFS Performance wheel, the geometry of which is designed to adapt the flow rate d'air. Its final performance also depends on the boost setting and the engine tuning.
The Stage 2 combines a larger impeller with a reprofiled intake housing d. This modification ensures d that the new impeller fits correctly and may alter the flow capacity as well as the turbocharger’s response.
This version uses a 7+7 oversized impeller and a modified d intake housing. However, a larger impeller does not automatically offer an advantage in all conditions: its operation must be consistent with the engine, the peripheral components and the intended use.
A hybrid turbo is based on a turbocharger design adapted for to accommodate modified internal components. Depending on the modification, these changes may involve the compressor wheel, its dimensions and the geometry of its blades, the casings, the turbine wheel, the thrust bearing system or the balancing.
The aim is d to adapt the compression capacity and air flow rate d to the requirements of the project. A hybrid turbo is therefore not defined solely by the appearance of its compressor wheel: all dimensions, profiles, machining and adjustments must remain consistent.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This term describes its manufacturing process, but does not in itself guarantee an increase in air flow d.
A standard MFS impeller may retain a geometry equivalent to that of the ori d. An MFS Performance impeller may, depending on its preparation, adopt a specific diameter, profile or blade configuration in order d to adapt its aerodynamic behaviour.
A standard MFS impeller can be just as effective as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air. A higher airflow can help generate more power when the engine tuning and peripherals are suitably configured, though this alone does not guarantee a performance gain.
The compressor impeller draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and the arrangement of its blades influence the compressor’s aerodynamic behaviour and its ability to move air under certain operating conditions.
The result also depends on the compressor housing, the impeller and the turbine housing, the boost pressure and the engine’s. set-up. An increase in size may alter the response time and the d range of optimal operation; it therefore does not automatically guarantee better performance.
The 360° thrust bearing, documented at each stage, distributes axial forces across a circular surface. It accommodates the stresses specific to the engine modification, without making the turbocharger insensitive to an oil d fault, incorrect installation or inappropriate settings.
The unit is balanced at high speed, at 150,000 rpm on a Cimat VSR test bench. This process aims to minimise vibrations and mechanical stresses on the rotor; it does not replace checks on the lubrication system or compliance with fitting instructions.
Adjustments to the engine management system may be necessary for to make the most of the hybrid turbo’s characteristics. The mapping, boost pressure, fuel supply, intake air cooling d, the exhaust system and, depending on the vehicle, the clutch or transmission must be checked.
The wastegate must be adjusted during installation and when remapping the ECU. A hybrid turbo does not automatically guarantee a power gain without appropriate preparation of the injection, exhaust, cooling and engine management systems.
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault before d installing the turbocharger. Check the lubrication system, the oil supply and return d as well as the cleanliness of all pipes.
Check the intake for foreign objects. Prime the system in accordance with the applicable recommendations and follow the manufacturer’s instructions during installation.
A lubrication fault that is not rectified may lead to the turbocharger failing again.
Check the part number marked on the original turbo d and compare it with the OEM and manufacturer part numbers in this datasheet. Also check the make, model, version and engine type 2.8 TD, the power rating of 90 hp or 115 hp and theYear mounting type. An identical engine specification is not always sufficient to confirm compatibility.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this data sheet. An identical engine model does not always guarantee compatibility.
If in doubt, please contact us with the part number from your turbocharger.
Reference: TB25-452022
Brand: ALFI TURBO ///
Year: From 1988Power: 90, hp, 115 hpdisplacement: 2.8 LEngine code: Not specifiedWarranty: 2 years
Reference: ACG-941
Brand: ALFI TURBO ///
Year: From 1988Power: 90 hp, 115 hpdisplacement: 2.8 LEngine code: Not specifiedWarranty: 2 years
Reference: wast
Brand: ALFI TURBO ///
Pneumatic control (wastegate) for turbo GARRETT HIH MHI KKK Toyota Brand new with a 2-year warranty. After placing your order, please let us know the exact part number of your turbo!
Reference: joints
Brand: ALFI TURBO ///
for Complete Gasket Set – for fitting your turbo.
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO