- Online only
- On sale!
This hybrid turbo is designed for engines Bmw 2.0 150 diesel hp fitted with the M47 D20 (204D4) engine. Its design incorporates an MFS compressor wheel Performance, a 360° bearing stop and high-speed balancing on a Cimat VSR test bench.
It is available in Stage 1, Stage 2 and Stage 2+, with different configurations for the Bmw 3 Series E46 and Bmw X3 E83 models documented below.
This setup uses an MFS wheel Performance with documented dimensions so that d'adjust the flow rate' d'compressor air'. Its ultimate performance depends on the engine management system and the overall mechanical configuration.
The Stage 2 is fitted with a larger wheel and a casing d'the intake, reshaped accordingly'. This combination aims to alter the throughput capacity, whilst allowing the response time and range to be adjusted d'optimal use'.
This version uses the largest compressor wheel of the three documented configurations. Its use requires the engine to be properly prepared and should not be regarded as automatically better suited to all applications.
A hybrid turbo is based on a specially adapted turbocharger design for to receive internal components that differ from the configuration d'origin'. Depending on the stage of preparation, modifications may relate to the compressor impeller, its geometry, its dimensions, the casings, the turbine impeller, the thrust bearing or the balancing.
The aim is d'adjust the compression capacity and flow rate' d'air'. However, a hybrid turbo is not defined solely by the appearance of its impeller: the consistency between the components, the machining and the balancing is crucial.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This term describes a manufacturing process and, on its own, is not sufficient to indicate an increase in flow rate d'air'.
A standard MFS wheel can retain a geometry equivalent to that d'origin'. An MFS wheel Performance may be fitted with a blade profile, diameter or configuration suited to the preparation objective, such as the configurations specified for each stage of this product’s development.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air'. A higher flow rate can enable the engine to produce more power when combined with a suitably tailored engine tuning programme.
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour and its ability to move air under certain operating conditions.
The result also depends on the compressor housing, the impeller and the turbine housing, the boost pressure and the engine tuning. A larger wheel may affect response time and range doptimal performance; its size alone is therefore not sufficient to determine how the turbo will behave.
The three documented work placements include d'a 360° bearing stop, designed for to distribute axial forces over a large area. It helps to adapt the bearing to operational stresses without eliminating the need d'proper lubrication'.
The rotor is balanced at high speed, up to 150,000 rpm, on a Cimat VSR test bench. This procedure is designed to minimise vibrations and mechanical stresses; it does not rectify a fault d'installation, contamination or a problem' d'oil supply'.
The farm d'A hybrid turbo may require adjustments to the engine mapping and boost pressure control'. The wastegate must be adjusted during the installation and remapping of the ECU.
Depending on the level of preparation, injection, fuel supply and air cooling d'The intake, exhaust, clutch or transmission may also require checking or adjustment'. Fitting the turbo alone does not automatically result in a power increase.
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the supply and the return d'the oil and the cleanliness of the pipes'.
Check the intake and ensure there are no foreign objects present. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions. The wastegate must be adjusted during the installation and remapping of the ECU.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
Check the part number marked on the turbocharger d'original', then compare it with the OEM and manufacturer's specifications in this data sheet. Also check the make, model, generation, body style, engine type and power output of 150 hp, the years of manufacture and the engine code M47 D20 (204D4).
Having the same engine is not always enough to confirm compatibility, as there may be several different configurations depending on the vehicle version.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d'origin' using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you are unsure about the identification or fitting, please contact us with the reference number clearly visible on your turbo d'origin'.
Reference: AG17-308
Brand: ALFI TURBO ///
Year: June 2004 – February 2007Power: 122 hpdisplacement: 1995 cm³Engine code: Not specifiedWarranty: 2 years
Reference: ACG-044
Brand: ALFI TURBO ///
Central cartridge Cartridge for several Bmw 2.0 D and TD of 150 hp, notably the 1 Series, 3 Series, 5 Series and X3 listed at. Warranty: 2 years.
Reference: joints
Brand: ALFI TURBO ///
for Complete Gasket Set – for fitting your turbo.
Reference: 2092-020-012
Brand: ALFI TURBO ///
454191-6, 704361-6, 710415-5, 49135-05671, 708366-1, 731877-4, 717478-1, 740911-1, 740911-7, 763091-1, 762965-1, 750952-13, OEM: 11127799224, 11127793163
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO