- Online only
This hybrid turbo is designed for the 1.and 2 TSI engines with 105 and 110 hp, fitted to certain Audi, Seat, Skoda and Volkswagen. . The kit combines a high-flow MFS compressor wheel, a dre-profiled intake housing and a 360° bearing retainer.
Designed for to Installation without modification the mechanical dof the original assembly, it nevertheless requires a suitable engine management system in order dto utilise its characteristics correctly.
This configuration is designed to optimise the air compressor’s compression capacity and flow rate dthrough the use of a larger impeller and a specifically re-profiled housing.
The 43 mm impeller alters the aerodynamic characteristics of the. compressor. Its performance depends on the engine tuning and other associated components.
A hybrid turbo retains an architecture suited to the original ‘ d’ fitment whilst incorporating internal modifications. Depending on the tuning, these may involve the compressor impeller, the housings, the turbine, the thrust bearing or the balancing. The aim is dto adapt the compression capacity and the air flow rate d, as a larger impeller alone does not guarantee better performance.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. A standard MFS wheel can retain a geometry close to the original, whilst an MFS ‘ Performance ’ impeller can have a diameter or profile tailored to the set-up. A standard MFS impeller can be just as polished as an MFS ‘ Performance ’ impeller. It is not its appearance that determines its performance, but its geometry and its ability to move more dair.
The diameter, profile, height, width and arrangement of the blades influence air intake and compression. The final performance also depends on the casings, the turbine, the boost pressure and the mapping. An increase in diameter can also alter the response time and the range dof optimal use.
The 360° thrust bearing distributes axial forces over a wide surface area. The rotor is balanced at 150,000 rpm on a Cimat VSR test bench to minimise vibrations and mechanical stresses. However, this balancing does not compensate for inadequate lubrication or incorrect installation.
The mapping and boost pressure management must be adjusted for to make the most of the turbo’s characteristics. The fuel injection, exhaust, intercooler d’intake and transmission must also be checked in line with the level of tuning. The wastegate must be adjusted when remapping the ECU.
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault. Check the lubrication system, the oil supply and return lines d, as well as the cleanliness of the oil lines. Check the intake for any foreign objects, then prime the system in accordance with the applicable recommendations. Follow the manufacturer’s instructions. A lubrication fault that is not rectified may lead to further turbocharger failure.
Check the turbo part number d, the original OEM and manufacturer part numbers, as well as the vehicle’s make, model, generation, engine type, power output,Year and engine code. An identical engine type does not automatically guarantee compatibility.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this specification sheet. An identical engine specification does not always guarantee compatibility. If in doubt, please contact us at for to check your fitment.
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO