- Online only
This hybrid turbo for engine options 2.0 TDI of 184 hp is available in three levels of preparation. Each version features an MFS compressor wheel Performance high-speed operation, a 360° bearing stop and high-speed balancing on a Cimat VSR test bench.
The documented assignments include, in particular, several Audi A3, Q3 and TT, SEAT Leon, Škoda Octavia III and Volkswagen Golf VII, Passat B8 and Tiguan. The benchmark for turbochargers dThe origin must be verified before any order is placed.
This setup is based on an MFS wheel Performance whose geometry and dimensions are suitable for adjust the compressor’s flow capacity. Its ultimate performance depends on the engine configuration and the turbocharging system.
The Stage 2 is fitted with a larger-diameter compressor wheel and a casing d’the intake, reshaped accordingly’. This combination aims to optimise airflow and compression, without prejudging the result achieved with each engine configuration.
This version uses an even larger compressor wheel, with a specific blade configuration and a housing d’re-profiled intake’. An increase in diameter can affect not only the available flow rate, but also the response time and the range doptimal use.
A hybrid turbo is based on a specially adapted turbocharger design for to receive internal components that differ from the configuration d’origin’. Depending on the design, modifications may relate to the compressor impeller, its dimensions, the geometry of the blades, the machining of the casings, the turbine impeller, the thrust bearing or the balancing.
The aim is d’adjust the compression capacity and flow rate’ dair. However, a hybrid turbo is not defined solely by the appearance of its impeller: the consistency between the components, machining, balancing and engine management remains crucial.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This designation describes a manufacturing process and does not, in itself, guarantee an increase in throughput dair.
A standard MFS wheel can retain a geometry equivalent to that d’origin’. An MFS wheel Performance may have a blade diameter, profile or configuration suited to the intended purpose, provided that these characteristics are documented.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more dair. A higher flow rate can help to generate more power when combined with appropriate engine tuning, although it does not, on its own, guarantee results.
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour and its ability to move air under certain operating conditions.
The result also depends on the compressor housing, the impeller and the turbine housing, the boost pressure and the engine tuning. A larger wheel therefore does not automatically guarantee a better result and may affect the turbocharger’s response time.
The 360° stop fitted to all three stages helps to distribute the axial forces acting on the rotating assembly. It does not exempt d’proper lubrication nor d’a compliant installation’.
Each preparation is balanced at high speed, up to 150,000 rpm, on a Cimat VSR test bench. This balancing is designed to minimise vibrations and mechanical stresses on the rotor, but does not protect the turbocharger against incorrect installation, contamination or a fault doil supply.
Appropriate engine management is required for make proper use of the features da hybrid turbo. Depending on the level of preparation, the mapping, the boost pressure, the fuel injection and the air cooling d’The intake, exhaust and transmission must be checked or adjusted’. The wastegate must be adjusted during fitting and remapping. No increase in power is automatic without proper configuration.
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the supply and the return d’oil, as well as the cleanliness of all the pipes.
Check the intake and ensure that no foreign objects can reach the wheels. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions.
The wastegate must be adjusted during fitting and remapping. If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
Note down the part number directly from the turbo’s nameplate or housing dCheck the original part number, then check the OEM and manufacturer’s part numbers. Also check the make, model, generation, body style, engine type and power output of 184 hp, the assembly period and the engine code. The same engine can be fitted with several different turbo set-ups.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d’origin’ using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If in doubt, please contact us with the full turbo part number dVehicle origin and details.
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO