- Online only
- On sale!
This hybrid turbo for engine options 2.0 HDI is available in three levels of preparation. Each version features an MFS compressor wheel Performance with a 360° bearing stop and high-speed balancing, with dimensions and modifications specific to each stage.
The documented applications relate to several Citroën C4, Jumpy and Xsara, as well as some Peugeot 307 producing 107, 109 or 110 hp. Compatibility must be confirmed using the turbo’s part number d’origin’.
This system is based on an MFS compressor wheel Performance whose geometry is designed to adjust the flow rate dair. Its dimensions and 4+4 configuration are specific to this course.
The larger diameter of the wheel means the casing needs to be re-profiled d’admission’. This adaptation makes it possible to d…to correctly incorporate the new geometry and may affect the range of motion d’air and the behaviour of the compressor.
This course uses an MFS wheel Performance of specific dimensions and a casing d’re-profiled intake’. However, a larger wheel alone does not guarantee better performance in all conditions: the result depends on the overall engine configuration.
A hybrid turbo utilises a turbocharger design that has been adapted to accommodate modified internal components. Depending on the modification, changes may relate to the compressor impeller, its dimensions and blades, the casings, the turbine impeller, the thrust bearing or the balancing.
The aim is d’adjust the compression capacity and flow rate’ dair. A hybrid turbocharger is therefore not defined solely by the appearance of its compressor wheel, but by the consistency of its geometry, machining and balancing.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This term describes the manufacturing process and does not, in itself, guarantee an increase in flow rate dair.
A standard MFS wheel can retain a geometry equivalent to that d’origin’. An MFS wheel Performance may use a geometry suited to the preparation objective, with a specific profile, diameter or blade configuration where these elements are documented.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more dair. A higher flow rate can help to generate more power, provided the engine has been suitably tuned.
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour and the amount dthe volume of air it can displace under certain conditions.
The result also depends on the compressor housing, the impeller and the turbine housing, the boost pressure and the engine management system. An increase in size may also affect the response time and the optimum operating range.
The 360° stop fitted to each stage helps to distribute the axial forces acting on the rotating assembly. It does not exempt d’proper lubrication nor d’a compliant installation’.
The rotor is balanced at high speed, up to 150,000 rpm, on a Cimat VSR test bench. The purpose of this balancing is to minimise vibrations and mechanical stresses, although it cannot compensate for a fault d’installation, contamination or insufficient oil supply.
Appropriate engine management may be required for make the most of the hybrid turbo’s features. Mapping, boost pressure, fuel injection, exhaust, air cooling d’Intake and transmission must be checked in accordance with the level of preparation’. The wastegate must be adjusted during the installation and remapping of the ECU. A turbocharger on its own does not guarantee any increase in power.
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Search for and correct the cause of the previous failure. Check the lubrication circuit, the supply and the return doil, the cleanliness of the pipes, and the intake, as well as the absence of foreign objects. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions. If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
Check the turbo part number d’origin, OEM and manufacturer part numbers, as well as the make, model, generation, body style, engine type, power output, production period and engine code. Having the same engine is not always enough to confirm compatibility.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d’origin’ using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you’re unsure, please contact us with the reference number shown on your turbo d’origin’.
Reference: ACK-151
Brand: ALFI TURBO ///
Year: From 1994Power: 71, 85, 87, 90, 106 and 110 hpdisplacement: 2.0 lEngine code: Not specifiedWarranty: 2 years
Reference: joints
Brand: ALFI TURBO ///
for Complete Gasket Set – for fitting your turbo.
Reference: KX03-200-057
Brand: KKK
Year: August 2000 to December 2012, depending on the assignmentPower: 107, 109 and 110 hpdisplacement: 1997 cm³Engine code: RHZ (DW10ATED), RHZ (DW10BTED), RHW (DW10ATED4)Warranty: 2 years
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO