This hybrid turbo plug & play is prepared for optimise throughput capacity dair, using an MFS compressor wheel Performance and components tailored to each stage. The three preparations on offer feature da 360° bearing stop and d’high-speed balancing at 150,000 rpm on a Cimat VSR test bench’.
The documented applications cover a number of diesel vehicles Chrysler, , Jeep and Mercedes-Benz, particularly the 320 engines CDI and CRD. The benchmark for turbochargers dThe origin must be verified before any order is placed.
This assembly uses an MFS wheel Performance a higher flow rate whilst maintaining the existing installation plug & play. Its design is intended to adjust the compression capacity and flow rate d’air, without prejudging the engine’s ultimate power.
The wheel oversized is associated with a reshaping of the casing d’admission’. This mechanical modification enables d…to accommodate the new geometry and can adjust the flow rate and the turbocharger’s response according to the engine settings.
This version features the largest documented Ferris wheel for this product and a casing d’the intake, reshaped accordingly’. A larger wheel can move more d’air under certain conditions, but it can also affect the response time and requires consistent preparation of the engine assembly.
A hybrid turbo is based on an existing architecture that has been adapted for to receive internal changes. Depending on the course, these may relate to the compressor wheel, its dimensions, the geometry of the blades, or the housing d’the intake, the stop system and the rotor balancing’.
The aim is d’adjust the compression capacity and flow rate’ dturbocharger air. However, a hybrid turbo is not defined solely by the appearance of its impeller: the consistency between the geometry, the housings, the balancing and the engine management system remains crucial.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in throughput. A standard MFS wheel can retain a geometry equivalent to that d’origin’.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more dair. Depending on its design, a wheel Performance may use a blade diameter, profile or configuration suited to the preparation objective.
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of its blades all influence its aerodynamic behaviour. The right geometry can move more dair within certain operating ranges.
The result also depends on the compressor housing, the turbine section, the boost pressure and the engine tuning. A larger wheel therefore does not automatically guarantee a better result and may affect the response time.
The 360° stop, documented for each stage, helps to distribute the axial forces borne by the rotating assembly. The rotor benefits from d’high-speed balancing at 150,000 rpm on a Cimat VSR test bench in order to minimise vibrations and mechanical stresses’.
These features do not compensate for a lack of lubrication or contamination of the system doil, a foreign object in the intake or incorrect installation.
It may be necessary to adjust the mapping and management of boost pressure for make the most of the hybrid turbo’s features. Depending on the level of preparation: fuel injection, exhaust, air cooling d’The intake and transmission must also be checked or adjusted’.
The wastegate must be adjusted during the installation and remapping of the ECU. The power output depends on the vehicle’s overall configuration and cannot be deduced from the turbocharger alone.
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Search for and correct the cause of the previous failure. Check the lubrication circuit, the supply and the return d’the oil and the cleanliness of all the pipes’.
Check the intake and exhaust systems and ensure there are no foreign objects present. Carry out turbo boost in accordance with the relevant guidelines and follow the manufacturer’s instructions.
Wastegate adjustment and remapping should be carried out by a qualified professional. If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
Check the part number engraved on the removed turbocharger and compare it with the OEM and manufacturer part numbers listed on this sheet. Also check the make, model, generation, body style and power output in hp, the assembly period and the engine code.
The same engine can be fitted with several different turbo set-ups. The single designation 320 CDI or CRD is therefore not always sufficient to confirm compatibility.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d’origin’ using the references given in this fact sheet. Having the same motor does not always guarantee compatibility. If you are in any doubt, please contact us with the reference number shown on your turbocharger.
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO