- Online only
This hybrid turbocharger for, designed for the following engines Bmw, 2., 0D, is available in three performance levels.. Each stage combines a high-flow MFS Performance compressor wheel with documented mechanical characteristics, featuring a 360° bearing stop and high-speed balancing on a Cimat VSR test bench.
The available configurations are for the Bmw Series 1 E87 diesel models with 150, 163 and 177 hp. The kit is designed for for installation plug & play, subject to precise verification of the vehicle’s part numbers and configuration.
This modification alters the compressor wheel to d'adapt its air displacement capacity d'. Its final performance depends on the engine management system and the overall mechanical configuration.
oversized ’s impeller requires the intake housing to be re-profiled d. This combination aims to adapt the airflow to the new geometry, without making any assumptions d regarding final power output.
This version uses a larger-diameter impeller and a specific blade configuration. Such a modification may alter the air flow rate d, the response time and the optimal operating range of the turbocharger.
A hybrid turbo is based on a turbocharger architecture adapted for accommodate modified internal components. Depending on the modification, these changes may relate to the compressor wheel, its dimensions, the blade geometry, the housings, the thrust bearing or the balancing.
The aim is d to adapt the compression capacity and air flow rate d to the requirements of the engine modification. A hybrid turbo is therefore not defined solely by the appearance of its compressor wheel, but by the consistency of its mechanical characteristics.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in air flow d. A standard MFS wheel may retain a geometry equivalent to that d of the original.
An MFS impeller Performance can be designed with a diameter, profile or blade configuration suited to the tuning objective. For this product, dimensions and configurations vary depending on the tuning package selected.
A standard MFS impeller can be just as effective as a Performance MFS impeller. It is not its appearance that determines its performance, but its geometry and its ability to move more d air. A higher airflow can contribute to power output when combined with a suitably tuned engine.
The compressor impeller draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour and its ability to move air under certain operating conditions.
The result also depends on the compressor housing, the turbine section, the boost pressure and the engine calibration. A larger impeller does not automatically guarantee a better result and may alter the turbo’s response time.
The 360° bearing stop documented at for for each stage helps to distribute the axial forces exerted on the rotating assembly. It does not replace d proper lubrication or d correct installation.
Each unit undergoes d ‘high-speed balancing at 150,000 rpm on a Cimat VSR test bench’. This process aims to minimise vibrations and mechanical stresses on the rotor, but does not protect the turbocharger against incorrect installation, inadequate lubrication or the presence d ‘of a foreign object’.
Appropriate engine management is required for to make the most of the characteristics d of a hybrid turbocharger. This includes mapping, boost pressure, injection, intake air cooling d, the exhaust and, depending on the vehicle, the clutch or transmission must be checked. The wastegate must be adjusted during installation and when remapping the ECU. The turbo alone does not guarantee a power gain.
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault. Check the lubrication circuit, as well as the oil supply and return d. Check that the pipes and the inlet are clean and free from foreign objects.
Carry out priming in accordance with the applicable recommendations and follow the manufacturer’s instructions. The wastegate and engine management must be set in line with the selected configuration.
Unresolved lubrication issues may lead to further turbocharger failure.
Check the part number marked on the turbo d the original, OEM and manufacturer part numbers, as well as the make, model, generation, engine type, power output, years of manufacture and engine code. An identical engine may be fitted with several different turbo set-ups.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this specification sheet. An identical engine specification does not always guarantee compatibility.
If in doubt, please contact us with the full part number taken from your original turbo d.
Reference: 1914-016-097
Brand: ALFI TURBO ///
Vehicle model:320D E90, 120D E87 Turbo part numbers:49135-05610, 49135-05620, 49135-05630, 49135-05640, 49135-05641, 49135-05650, 49135-05651, 49135-05660, 49135-05670, 49135-05671, 11654716166, 11657795498, 11657795499, 1165779549907, 4716166, 7795409, 7795498, 779549807, 7795498D, 7795498F, 7795498J, 779549907, 7795499K Reference Bmw 11427791624
Reference: 2092-020-012
Brand: ALFI TURBO ///
454191-6, 704361-6, 710415-5, 49135-05671, 708366-1, 731877-4, 717478-1, 740911-1, 740911-7, 763091-1, 762965-1, 750952-13, OEM: 11127799224, 11127793163
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO