Hybrid Turbo Bmw 2.0 D 116 136 143 hp, 11658506722, 11658518204, 11658518205, 11658513123, 11658513122, RHV4-T39, 9VB01

  • Online only
Hybrid
Hybrid Turbo Bmw 2.0 D 116 136 143 hp, 11658506722, 11658518204, 11658518205, 11658513123, 11658513122, RHV4-T39, 9VB01
  • Hybrid Turbo Bmw 2.0 D 116 136 143 hp, 11658506722, 11658518204, 11658518205, 11658513123, 11658513122, RHV4-T39, 9VB01
HYB39-400-204
Year: February 2007 to June 2019
Power: 116, 136 and 143 hp
displacement: 2.0 D
Engine code: N47 D20 A, N47 D20 C, B47 D20 A
Exchange
Gasket kit
Preparation course
€444.00 VAT included

370 tax excl.

Quantity
Manufacturing time: 15-20 working days

Description

This hybrid turbo for engines Bmw 2.0 Diesel is available in three trim levels. Each version is fitted with an MFS compressor wheel Performance high flow rate, a 360° bearing stop and high-speed balancing on a Cimat VSR test bench.

The documented assignments cover several Bmw Series 1, Series 2, Series 3, Series 4 and X1, with power outputs of 116, 136 or 143 hp. Compatibility must be confirmed using the turbo’s part number d’origin’.

Available products — Stage 1, Stage 2 and Stage 2+

Stage 1
Compressor wheel: MFS Performance high-speed
Dimensions: 36.35 / 49.00 mm
Blade configuration: 6+6
Level: 360° stop
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench

This setup is based on an MFS wheel Performance designed for adjust the flow rate dcompressor air. Its final behaviour depends on the engine management system and all the associated components.

Stage 2
Compressor wheel: MFS Performance high-speed oversized
Dimensions: 37.15 / 51.09 mm
Blade configuration: 6+6
Carter d’Admission:’ reprofiled for to receive the wheel oversized
Level: 360° stop
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench

The Stage 2 combines a larger wheel with a re-profiled casing d’admission’. This adaptation aims to make the most of the new geometry whilst maintaining a coherent whole.

Stage 2+
Compressor wheel: MFS Performance high-speed oversized
Dimensions: 41.90 / 54.00 mm
Blade configuration: 6+6
Carter d’Admission:’ reprofiled for to receive the wheel oversized
Level: 360° stop
Balancing: high speed at 150,000 rpm on a Cimat VSR test bench

This version features the largest compressor wheel of the three documented configurations. An increase in its dimensions affects the flow capacity and may also influence the response time and the optimum operating range.

What is a hybrid turbo ?

A hybrid turbo uses a specially adapted turbocharger design for to receive modified internal components. Depending on the specific design, modifications may relate to the compressor wheel, its dimensions, the geometry of the blades, the machining of the casings, the thrust bearing or the balancing.

The aim is d’adjust the compression capacity and flow rate’ dair. However, a hybrid turbo is not defined solely by the appearance of its impeller: the compatibility between the components, their geometry and the engine settings is crucial.

MFS compressor wheel: standard or Performance ? ?

MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process does not, on its own, guarantee an increase in throughput dair. A standard MFS wheel can retain a geometry equivalent to that d’origin’.

A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more dair. An MFS wheel Performance can be fitted with a blade profile, dimensions or configuration suited to the application. A higher flow rate can support an increase in power when the engine management system and components are correctly configured, although this alone does not guarantee the desired result.

Why does the geometry of the blades affect the flow rate? d’air ?

The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of its blades all influence its aerodynamic behaviour. The right geometry can move more dair under certain conditions, but the result also depends on the casings, the turbine wheel, the boost pressure and the engine tuning. A larger wheel therefore does not automatically guarantee better performance and may affect response time.

Reliability and balancing of the hybrid turbocharger

The 360° stop distributes axial forces over a wide area. The three training courses documented here are equipped with them. The rotor also benefits from d’high-speed balancing at 150,000 rpm on a Cimat VSR test bench in order to minimise vibrations and mechanical stresses’. This balancing does not compensate for a lack of lubrication, contamination or an assembly error.

Engine remapping and tuning

It may be necessary to adjust the mapping and management of boost pressure for make the most of the hybrid turbo’s features. Depending on the level of preparation: fuel injection, exhaust, air cooling d’The intake, clutch or gearbox must also be checked’. The wastegate must be adjusted during fitting and remapping. No increase in power is automatic without the appropriate engine settings.

Turbo part numbers

OEM part numbers
11658513122
11658506722
8513122
8506722
11658513123
11658518205
11658518204
A2C30724900
Manufacturer’s part numbers
781232102
781232103
781232104
8513123
8518205
8518204
RHV4-T39
9VB01
V41VEG-SR022B

Compatible vehicles and assignments

Bmw
Bmw 1 (F20) — PC — 116 hp
Diesel — July 2011 to February 2015
Engine code : N47 D20 C
Bmw 1 (F20) — PC — 136 hp
Diesel — July 2011 to June 2019
Engine codes: N47 D20 C, B47 D20 A from March 2015
Bmw 1 (F20) — PC — 143 hp
Diesel — July 2011 to February 2015
Engine code : N47 D20 C
Bmw 1 (F20) — PC — 143 hp
Diesel — July 2013 to February 2015
Engine code : N47 D20 C
Bmw 1 (F21) — PC — 116 hp
Diesel — July 2012 to February 2015
Engine code : N47 D20 C
Bmw 1 (F21) — PC — 136 hp
Diesel — December 2011 to February 2015
Engine code : N47 D20 C
Bmw 1 (F21) — PC — 143 hp
Diesel — December 2011 to an unspecified date
Engine code : N47 D20 C
Bmw 1 (F21) — PC — 143 hp
Diesel — May 2013 to an unspecified date
Engine code : N47 D20 C
Bmw 2 Coupé (F22, F87) — PC — 143 hp
Diesel — March 2014 to June 2015
Engine code : N47 D20 C
Bmw 3 (E90) — PC — 116 hp
Diesel — July 2009 to December 2011
Engine code : N47 D20 C
Bmw 3 (E90) — PC — 136 hp
Diesel — September 2007 to October 2011
Engine codes: N47 D20 A up to August 2008, N47 D20 C
Bmw 3 (E90) — PC — 143 hp
Diesel — February 2007 to October 2011
Engine codes: N47 D20 A, N47 D20 C
Bmw 3 (F30, F80) — PC — 116 hp
Diesel — March 2012 to October 2018
Engine codes: N47 D20 C, B47 D20 A
Bmw 3 (F30, F80) — PC — 136 hp
Diesel — March 2012 to October 2018
Engine codes: N47 D20 C, B47 D20 A
Bmw 3 (F30, F80) — PC — 143 hp
Diesel — March 2012 to June 2015
Engine code : N47 D20 C
Bmw 3 (F30, F80) — PC — 143 hp
Diesel — July 2013 to June 2015
Engine code : N47 D20 C
Bmw 3 Gran Turismo (F34) — PC — 136 hp
Diesel — March 2013 to June 2015
Engine codes: N47 D20 C, B47 D20 A from July 2015
Bmw 3 Gran Turismo (F34) — PC — 143 hp
Diesel — March 2013 to June 2015
Engine code : N47 D20 C
Bmw 3 Touring (E91) — PC — 116 hp
Diesel — September 2009 to June 2012
Engine code : N47 D20 C
Bmw 3 Touring (E91) — PC — 136 hp
Diesel — July 2007 to June 2012
Engine codes: N47 D20 A up to August 2008, N47 D20 C
Bmw 3 Touring (E91) — PC — 143 hp
Diesel — September 2007 to June 2012
Engine codes: N47 D20 A, N47 D20 C
Bmw 3 Touring (F31) — PC — 116 hp
Diesel — November 2012 to June 2019
Engine codes: N47 D20 C, B47 D20 A
Bmw 3 Touring (F31) — PC — 136 hp
Diesel — November 2012 to June 2019
Engine codes: N47 D20 C, B47 D20 A
Bmw 3 Touring (F31) — PC — 143 hp
Diesel — November 2012 to June 2015
Engine code : N47 D20 C
Bmw 3 Touring (F31) — PC — 143 hp
Diesel — July 2013 to June 2015
Engine code : N47 D20 C
Bmw 4 Gran Coupé (F36) — PC — 143 hp
Diesel — March 2014 to June 2015
Engine code : N47 D20 C
Bmw X1 (E84) — PC — 116 hp
Diesel — April 2012 to June 2015
Engine code : N47 D20 C
Bmw X1 (E84) — PC — 136 hp
Diesel — March 2009 to June 2015
Engine code : N47 D20 C
Bmw X1 (E84) — PC — 143 hp
Diesel — October 2009 to June 2015
Engine code : N47 D20 C
Bmw X1 (E84) — PC — 143 hp
Diesel — December 2009 to June 2015
Engine code : N47 D20 C

Additional technical specifications

Product type: hybrid turbo
Engine: Bmw 2.0 D
Fuel: diesel
Documented power ratings: 116, 136 and 143 hp
Engine codes: N47 D20 A, N47 D20 C, B47 D20 A
Documented periods: February 2007 to June 2019, depending on the assignment

Assembly instructions

⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY

Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the supply and the return d’the oil and the cleanliness of the pipes’. Check the intake and ensure there are no foreign objects, then prime the system in accordance with the relevant guidelines.

Follow the manufacturer’s instructions and have the wastegate adjustment and mapping carried out by a qualified professional. If a lubrication fault is not rectified, it may lead to the turbocharger failing again.

How do you choose the right turbo ?

Check the turbo part number d’origin, OEM and manufacturer part numbers, as well as the vehicle’s model, generation, body style, power output, production period and engine code. The same engine can be fitted with several different turbo set-ups.

⚠️ Check your turbo’s part numbers

Before placing your order, Compare the part number on your turbocharger d’origin’ using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.

If you are unsure, please contact our team with the part number shown on your turbocharger and the vehicle details.

Product Details
HYB39-400-204
Hybrid
Attachments
Download

Turbo: specialists in turbochargers since 2012

ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.

Find the right turbocharger for your engine

The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.

ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.

You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.

Turbo new, remanufactured, hybrid and Cartridge

Turbo new

Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.

View new turbochargers →

Turbo as remanufactured units

A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.

View standard exchange turbochargers →

Hybrid Turbo

Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.

View hybrid turbos →

Cartridge turbo

The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.

View turbo Cartridge →

for turbochargers for a wide range of applications

Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.

  • diesel and petrolcars;
  • commercial vehicles;
  • heavy goods vehicles and lorries;
  • construction and civil engineeringmachinery;
  • tractors and agricultural machinery;
  • boats and marine applications.

How do you identify the correct turbo part number?

A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.

Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.

Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.

Turbo failure: identify the cause before replacement

A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.

However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.

It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.

→ Identifying the symptoms d of a turbo failure

→ Understand the main causes of turbo failure d

ALFI TURBO, specialists in turbochargers since 2012

Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.

  • over 20,000 items in the catalogue;
  • over 5,500 new turbochargers in stock;
  • over 6,000 ‘ Cartridge ’ available;
  • new turbochargers, remanufactured units, hybrid units and Cartridge;
  • diesel and petrol engines;
  • a wide range of applications for road, agricultural, industrial and marine use;
  • fast delivery in France and across Europe;
  • warranty of up to 2 years depending on the product and applicable conditions.

BEFORE REPLACING A TURBO

A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.

Need d'help for finding your turbo?

Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.

CONTACT ALFI TURBO