- Online only
This hybrid turbocharger plug & play is designed for the Toyota Land Cruiser 80 diesel models fitted with 1HD-T and 1HD-FT engines rated at 160, 167 or 170 hp. The three available configurations utilise a high-flow MFS Performance compressor wheel, a 360° bearing retainer and high-speed balancing.
The Stage 1, Stage 2 and Stage 2+ differ in the dimensions and configuration of their compressor impeller. The Stage 2 and Stage 2+ versions also feature a d re-profiled inlet housing.
This configuration combines a high-flow MFS Performance impeller with a 6+6 configuration. Its geometry is designed to adapt the compressor’s air displacement capacity d without specifying a predefined final power output.
Stage 2 is fitted with a oversized compressor wheel and a d intake housing adapted to its dimensions. This combination can alter the air flow rate d and the behaviour of the turbocharger depending on the engine settings and operating conditions d.
The Stage 2+ features a larger impeller with an 11+0 blade configuration. The d intake housing has been reshaped accordingly. A larger impeller does not automatically guarantee better performance in all conditions: the overall set-up must remain consistent.
A hybrid turbo is based on a turbocharger design adapted for to accommodate modified internal components. Depending on the modification, changes may involve the compressor wheel, its dimensions, the blade geometry, the housings, the turbine wheel, the thrust bearing system or the balancing.
The aim is d to adapt the compression capacity and air flow rate d. A hybrid turbo is therefore not defined solely by the appearance of its compressor wheel, but by the coherence of its mechanical design.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in air flow rate d'air. A standard MFS wheel may retain a geometry equivalent to the d'original.
An MFS impeller Performance can be given a geometry tailored to the tuning objective, in particular a specific profile, diameter or blade configuration, provided these elements are documented.
A standard MFS impeller can be just as shiny as a custom- Performance MFS impeller. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air. A higher airflow can contribute to power output with a suitably adapted engine set-up, though this alone does not guarantee a gain.
The compressor impeller draws in and then compresses the air intended for the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour and the amount d of air it can move under certain conditions.
The result also depends on the compressor housing, the impeller and the turbine housing, the boost pressure and the engine set-up. An increase in size can also alter the response time and the range d of optimal operation.
The 360° bearing thrust ring, documented at each stage, helps to distribute axial forces over a wide surface area. However, it does not eliminate the need d for proper lubrication or compliance with fitting conditions.
The rotor is balanced at high speed, at 150,000 rpm on a Cimat VSR test bench, to minimise vibrations and mechanical stresses. This balancing does not protect against incorrect installation, inadequate lubrication or the presence d of a foreign object.
Operating d a hybrid turbo may require adjustments to the engine mapping and boost pressure management. Depending on the level of tuning, the injection, fuel supply, intake air cooling d, the exhaust, the clutch or the transmission must also be checked. The wastegate must be adjusted during installation and when remapping the ECU. The turbo alone does not guarantee a power gain.
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault. Check the lubrication circuit, as well as the oil supply and return d, then check that the lines are clean.
Check the intake for foreign objects. Prime the system in accordance with the applicable recommendations and follow the manufacturer’s instructions. The wastegate and engine management must be adjusted to match the chosen set-up.
Unresolved lubrication issues may lead to further turbocharger failure.
Check the part number marked on the original turbo d and compare it with the OEM and manufacturer part numbers in this fact sheet. Also check the model, generation, version, fuel type, power output at hp, years of manufacture and engine code. An identical engine specification is not always sufficient to confirm compatibility.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this specification sheet. An identical engine specification does not always guarantee compatibility.
If in doubt, please contact us with the part number clearly visible on your turbocharger.
Reference: AT26-030
Brand: ALFI TURBO ///
Year: From 1990Power: 160, 167 and 168 hpdisplacement: 4.2Engine code: Not specifiedWarranty: 2 years
Reference: ACT-105
Brand: ALFI TURBO ///
Year: From 1985 onwards, depending on allocationPower: 95, 100, 123, 136, 167, 168 and 204 hpdisplacement: 3.4, 4.0 and 4.2Engine code: Not specifiedWarranty: 2 years
Reference: wast
Brand: ALFI TURBO ///
Pneumatic control (wastegate) for turbo GARRETT HIH MHI KKK Toyota Brand new with a 2-year warranty. After placing your order, please let us know the exact part number of your turbo!
Reference: joints
Brand: ALFI TURBO ///
for Complete Gasket Set – for fitting your turbo.
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO