- Online only
This hybrid turbocharger is designed for the following engines Toyota 1.4 D-4D 90 hp, as listed in this data sheet. Its specification includes, in particular, a high-flow MFS compressor wheel, a 360° bearing stop and high-speed balancing on a Cimat VSR test bench.
Documented applications cover several generations of the Toyota, Auris, Corolla and Yaris. Compatibility must always be confirmed using the original turbo part number d.
This modification is designed to adapt the compressor’s air flow rate dwhilst incorporating a thrust bearing designed for to distribute the axial forces more evenly. Its final performance depends on the engine’s configuration and settings.
The oversized impeller and the re-profiling of the dintake housing enabl dto adapt the airflow to this configuration. An increase in size may also alter the response time and the range d’ optimal use.
This variant incorporates the mechanical modifications documented above. No power gain or additional dimensional differences are claimed without further technical data.
A hybrid turbo utilises a turbocharger architecture adapted for to accommodate internal modifications. Depending on the specification, these may relate to the compressor wheel, its dimensions or geometry, the housings, the turbine wheel, the thrust bearing system or the balancing.
The aim is dadapt the compression capacity and air flow rate d. A hybrid turbo is therefore not defined solely by the appearance of its compressor wheel, and its potential depends on the coherence of the entire mechanical assembly.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in air flow rate d. A standard MFS wheel may retain a geometry equivalent to that dof the original.
An MFS impeller Performance can be designed with a geometry tailored to the intended application: specific blade profile, dimensions or configuration, provided these elements are documented. A standard MFS impeller can be just as shiny as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d’air.
A higher d’air flow rate can contribute to the development d’of greater power with appropriate engine tuning, though it does not in itself guarantee results.
The compressor impeller draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour. A suitable geometry can move more dair under certain operating conditions.
The result also depends on the housings, the turbine wheel, the boost pressure and the engine tuning. A larger turbine wheel does not automatically perform better in all conditions and may affect response time.
The 360° thrust bearing featured on the three documented stages helps to distribute axial forces around the bearing system. However, it does not replace d’proper lubrication or d’correct installation.
The rotor is balanced at high speed, up to 150,000 rpm on a Cimat VSR test bench, in order to minimise vibrations and mechanical stresses. This balancing does not protect the turbocharger against incorrect installation, contamination or a fault din the oil supply.
Adjustments to the engine management system may be necessary for to make the most of the hybrid turbo’s characteristics. The mapping, boost pressure, injection, air cooling dthe intake, the exhaust and, depending on the vehicle, the transmission must be checked or adjusted. The wastegate must be adjusted during fitting and remapping. The hybrid turbo does not automatically guarantee a power gain without appropriate preparation.
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault. Carefully check the lubrication system, as well as the oil supply and return d. Check that the pipes and the inlet are clean and free from foreign objects.
Carry out the priming procedure in accordance with the applicable recommendations and follow the manufacturer’s instructions. The wastegate adjustment and engine management must be carried out by a qualified professional.
Unresolved lubrication issues may lead to further turbocharger failure.
Check the part number marked on the original turbo d, then compare the OEM and manufacturer part numbers.. Also check the make, model, generation and engine type 1.4 D-4D, power output from 90 hp, theYear and, where available, the engine code.. An identical engine specification does not always guarantee compatibility.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this data sheet. An identical engine specification does not always guarantee compatibility.
If you are unsure about the identification or fitment, please contact us before ordering.
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO