- Online only
This hybrid turbocharger is designed for the Range Rover TD6 2.9 TDI, with a power output of 177 hp, from 2002 onwards.. The upgrade combines a high-flow MFS compressor wheel, a 360° bearing stop and high-speed balancing.
Three levels of modification are documented at.. The modifications become progressively more extensive and may involve the intake casing d, the turbine wheel and the turbine casing.
This modification is carried out on the compressor impeller in order dto adjust the compression capacity and the air flow rate d. The result also depends on the motor settings and associated peripherals.
The housing has been re-profiled to allow dto fit the compressor wheel oversized. This configuration aims to optimise air flow and compression, without necessarily da specific increase in power.
This stage involves modifications to the compressor and turbine sides. A larger impeller can alter the flow rate, response time and optimal operating range of the turbocharger.
A hybrid turbo is based on a turbocharger architecture adapted for to accommodate internal components that differ from the original dconfiguration. Depending on the stage, modifications may involve the compressor impeller, casings, turbine impeller, thrust bearing and balancing.
The aim is d’to adjust the compression capacity and the air flow rate d’. However, a hybrid turbo is not defined solely by the appearance of its impeller: the geometry of the components, their combination and the engine settings are crucial.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in airflow d. A standard MFS wheel may retain a geometry equivalent to that dof the original.
An MFS impeller Performance can be given a geometry tailored to the tuning objective. For this product, a high-flow MFS impeller is documented, with a version oversized for for Stages 2 and 3.
A standard MFS impeller can be just as effective as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d’air. A higher flow rate can contribute to power output when the engine tuning is correctly adapted.
The compressor impeller draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and blade arrangement influence its aerodynamic behaviour and the amount dof air displaced under certain conditions.
The result also depends on the housings, the turbine wheel, the boost pressure and the engine management system. A larger wheel therefore does not automatically guarantee better performance and may affect response time.
The 360° thrust bearing, documented across the three stages, helps to distribute axial forces around the turbocharger’s axis. It does not, however, replace d’proper lubrication or d’correct installation.
The assembly is balanced at high speed, at 150,000 rpm on a Cimat VSR test bench. This operation aims to limit vibrations and mechanical stresses on the rotor, but does not protect against d’installation faults, contamination or insufficient oil supply.
The engine management system must be adapted for to make full use of the hybrid turbo’s characteristics. The wastegate must be adjusted during the ECU reprogramming.
Depending on the level of tuning, the fuel injection, exhaust system, cooling, boost pressure and transmission must be checked or adjusted. Fitting this turbo does not automatically guarantee a power gain without a coherent configuration of the engine and its peripheral components.
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault. Check the lubrication circuit, including the oil supply and return d, then check that all pipes are clean.
Check the inlet and ensure that no foreign objects can reach the compressor. Carry out priming in accordance with the applicable recommendations and follow the vehicle manufacturer’s instructions.
A lubrication fault that is not rectified may lead to further damage to the turbocharger.
Check the part number marked on the original turbo dand compare it with the OEM and manufacturer part numbers in this data sheet. Also check the make, model, TD6 version 2.9 TDI, power output 177 hp and theYear.
An identical engine specification does not always guarantee compatibility: there may be several different set-ups depending on the generation, the vehicle’s configuration or the production period.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this data sheet. An identical engine does not always guarantee compatibility.
If in doubt, please contact us with the full part number taken from your turbocharger.
Reference: AG22-541
Brand: ALFI TURBO ///
Turbo for Land Rover Range Rover III 3 0 4x4, 177 , registered from 03/2002 to 08/2012, with a 6-cylinder engine, 2,926 cm³ : not specified; 2-year warranty. D hp Diesel. Engine code.
Reference: ACG-329
Brand: ALFI TURBO ///
Year: From 2002Power: 176 / 177 hp, according to the data provideddisplacement: 2.9 lEngine code: Not specifiedWarranty: 2 years
Reference: wast
Brand: ALFI TURBO ///
Pneumatic control (wastegate) for turbo GARRETT HIH MHI KKK Toyota Brand new with a 2-year warranty. After placing your order, please let us know the exact part number of your turbo!
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO