- Online only
This hybrid turbo for engine options 2.0 TFSI benefits from d'an in-house preparation designed' for adjust the flow rate d'air whilst maintaining a configuration d'type of installation' plug & play documented. The two available versions feature an MFS compressor wheel Performance, a 360° bearing stop and high-speed balancing.
The applications listed cover, amongst other things, several Audi A1, A3 and TT, Seat Leon, Volkswagen Golf and Scirocco. Compatibility must always be confirmed using the turbo’s part number d'origin and engine code'.
This setup uses an MFS wheel Performance whose dimensions and configuration are suited to a flow rate d'increased air'. However, the result depends on the engine management system and all the associated components.
The Stage The 2+ is fitted with a larger-diameter compressor wheel and a casing d're-profiled intake'. This development may increase mobility d'air, but it can also alter the turbocharger’s response and requires consistent tuning.
A hybrid turbo utilises a suitably adapted turbocharger design for to receive modified internal components. Depending on the design, modifications may relate to the compressor wheel, its dimensions, the geometry of the blades, the casings, the thrust bearing or the balancing.
The aim is d'adjust the compression capacity and flow rate' d'air to meet needs' d'engine tuning'. A hybrid turbo is therefore not defined solely by the appearance of its compressor wheel, but by the coherence of the mechanical assembly as a whole.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process does not, on its own, guarantee an increase in throughput d'air'. A standard MFS wheel can retain a geometry equivalent to that d'origin'.
An MFS wheel Performance can be designed with a geometry suited to the intended application, for example a specific profile, diameter or blade configuration. For this product, the dimensions and configurations are listed separately for each work placement.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air'. A higher flow rate can contribute to power output with the right engine tuning, although this alone does not guarantee results.
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour and the amount d'the amount of air it can move under certain conditions'.
The result also depends on the compressor housing, the turbine section, the boost pressure and the engine calibration. A larger wheel is not automatically the best choice in every situation: it can also affect response time and range d'optimal use'.
The 360° bearing stop fitted to both stages helps to distribute the axial forces around the axis. It does not exempt d'proper lubrication or compliance with the installation requirements'.
The assembly is balanced at high speeds, up to 150,000 rpm, on a Cimat VSR test bench. The aim of this balancing process is to minimise vibrations and mechanical stresses on the rotor, without compensating for any defect d'installation, contamination or an inadequate oil supply'.
Making use of characteristics d'A hybrid turbo requires appropriate engine management'. Mapping, boost pressure, fuel injection, air cooling d'The intake, exhaust and other components must be checked or adjusted depending on the level of preparation'.
The wastegate must be adjusted during the installation and tuning of the ECU. A hybrid turbo does not automatically guarantee a power boost without appropriate engine tuning.
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Identify and rectify the cause of the previous fault. Check the entire lubrication circuit, including the supply and return lines d'oil'.
Check that the ducts and the intake are clean and free from foreign objects. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
Check the part number marked on the turbocharger d'origin and compare it with the OEM and manufacturer part numbers listed on this sheet'. Also check the make, model, generation, body style, engine type and power output in hp, the assembly period and the engine code.
An identical engine does not always guarantee compatibility, as several different configurations may coexist depending on the vehicle version.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d'origin' using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you are in any doubt, please contact us with the full part number from your turbocharger.
Reference: ACK-240T
Brand: ALFI TURBO ///
Year: From 2003 onwards, depending on allocationPower: 230, 235, 241, 256, 260, 265, 271 and 272 hpdisplacement: 2.0 TFSIEngine code: Not specifiedWarranty: 2 years
Reference: AK04-M064
Brand: ALFI TURBO ///
Year: September 2006 – end date not specifiedPower: 230, 240, 256, 265, 270, 272 and 300 hpdisplacement: 1,984 cm³Engine code: Not specifiedWarranty: 2 years
Reference: joints
Brand: ALFI TURBO ///
for Complete Gasket Set – for fitting your turbo.
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO