- Online only
This hybrid turbo for 2.7 and 3.0 engine sizes TDI is based on a configuration plug & play and receives in-house training tailored to the selected course. The three documented variants all feature an MFS compressor wheel Performance, a 360° bearing stop and high-speed balancing.
The assignments cover, in particular, several Audi A4, A6, A8 and Q7, as well as the Volkswagen Phaeton and Touareg. The benchmark for turbochargers dThe origin, engine code and date of manufacture must be checked before placing any order.
This configuration uses an MFS wheel Performance designed to regulate the flow rate d’compressor air, whilst maintaining an installation with no documented external modifications’. Its ultimate performance depends on the engine management system and the overall mechanical configuration.
The wheel oversized and the re-profiling of the casing d’Admission modifications affect the vehicle’s range’ dcompressor air. This change may also affect the response time and must be taken into account by means of appropriate calibration.
This variant uses the largest documented wheel for this product and a casing d’an inlet suited to its dimensions’. A larger size alone does not guarantee better performance in all conditions: the outcome depends on the engine being fully prepared.
A hybrid turbo retains a turbocharger design that is suitable for accommodating modified internal components. Depending on the design, these modifications may relate to the compressor impeller, its dimensions, the geometry of the blades, the casings, the turbine impeller, the thrust bearing or the balancing.
The aim is d’adjust the compression capacity and flow rate’ dair. A hybrid turbo is therefore not defined solely by the appearance of its impeller: consistency between the components and the quality of their fit are essential.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This term describes a manufacturing process and does not, in itself, guarantee an increase in throughput dair.
A standard MFS wheel can retain a geometry equivalent to that d’origin’. An MFS wheel Performance may, where the technical specifications so provide, adopt a blade profile, diameter or configuration suited to the purpose of the preparation.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more dair. A higher flow rate can help to generate more power only if the engine has been properly tuned.
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour and the amount dthe volume of air it can displace under certain conditions.
The result also depends on the compressor housing, the impeller and the turbine housing, the boost pressure and the engine calibration. A larger wheel may affect response time and range doptimal use; it therefore does not automatically guarantee a better result.
The 360° stop, documented for each stage, helps to distribute the axial forces borne by the rotating assembly. However, it does not exempt one from d’proper lubrication nor d’a compliant installation’.
The rotor is balanced at high speed – 150,000 rpm – on a Cimat VSR test bench, in order to minimise vibrations and mechanical stresses. This balancing does not protect against a fault dthe oil supply, the presence da foreign object or incorrect installation.
The mapping and management of boost pressure need to be adjusted for make the most of the features da hybrid turbo. Depending on the level of preparation, the fuel supply and the air cooling d’The intake, exhaust, clutch or transmission may also need to be checked or adjusted’. The wastegate must be adjusted during installation and calibration. No increase in power is automatic without the appropriate configuration.
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the supply and the return d’the oil and the cleanliness of all the pipes’.
Check the intake and ensure there are no foreign objects. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions. The wastegate and engine management system must be adjusted in line with the chosen set-up.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
Check the part number marked on the turbocharger d…the original and compare it with the OEM and manufacturer’s specifications in this data sheet. Also check the make, model, generation, body style, engine type and power output in hp, the assembly period and the engine code. Having the same engine is not always enough to confirm compatibility.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d’origin’ using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you are in any doubt, please contact us with the full reference number of your turbocharger dVehicle origin and details.
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO