Hybrid Turbo Bmw 3.0D 211 235 hp, 89002080, 11657796313, 11657796314, 7796314L12, 1104102, 765985-0001, 765985-5001S

  • Online only
Hybrid
Hybrid Turbo Bmw 3.0D 211 235 hp, 89002080, 11657796313, 11657796314, 7796314L12, 1104102, 765985-0001, 765985-5001S
  • Hybrid Turbo Bmw 3.0D 211 235 hp, 89002080, 11657796313, 11657796314, 7796314L12, 1104102, 765985-0001, 765985-5001S
HYB-400-996
Year: December 2006 to July 2013
Power: 211, hp and 235 hp
displacement: 3,..0 litres
Engine code: M57 D30 (306D3), N57
Exchange
Gasket kit
Preparation course
€409.80 VAT included

341.5 tax excl.

Quantity
Delivery 3-30 working days

Description

This hybrid turbocharger is designed for the following engines Bmw 3.0 diesel engines with power outputs of 211 hp and 235 hp. Its design incorporates a high-flow MFS compressor wheel, a 360° bearing thrust ring and high-speed balancing, with three documented configuration levels.

The available applications are for the Bmw X5 E70. The plug & play configuration allows for an external Installation without modification, subject to carefully checking the part numbers of the original turbocharger d.

Available tuning packages — Stage 1, Stage 2 and Stage 2+

Stage 1
Compressor wheel: MFS high-flow Performance
Dimensions: 44.39 / 60.01 mm
Blade configuration: 11+0
Bearing stop: 360°
Balancing: high-speed at 150,000 rpm on a Cimat VSR bench

This configuration combines a high-flow MFS impeller with a 360° thrust bearing. Its geometry is designed to adapt the compressor’s air displacement capacity d whilst maintaining the dimensions specific to this stage.

Stage 2
Compressor impeller: high-flow MFS oversized Performance
Dimensions: 49.50 / 63.00 mm
Blade configuration: 6+6
d intake housing: re-profiled for accommodate the impeller oversized
Bearing thrust: 360°
Balancing: high-speed at 150,000 rpm on a Cimat VSR test bench

dThe larger impeller diameter requires the intake casing to be re-profiled. This modification may alter the air flow rate d and the compressor’s performance; its operation depends on the overall engine configuration.

Stage 2+
Compressor impeller: MFS high-flow oversized Performance
Dimensions: 49.70 / 67.40 mm
Blade configuration: 6+6
d intake housing: re-profiled for accommodate the impeller oversized
Bearing thrust: 360°
Balancing: high-speed at 150,000 rpm on a Cimat VSR test bench

dThis version uses a compressor wheel with specific dimensions and a reprofiled intake casing. A larger wheel can increase flow capacity under certain conditions, but may also alter the response time and the range d for optimum performance.

What is a hybrid turbo?

A hybrid turbo retains a turbocharger architecture designed for to accommodate modified internal components. Depending on the stage of the upgrade, modifications may involve the compressor wheel, its geometry, its dimensions, the reprofiling of the housing, the thrust bearing or the balancing.

The aim is d to adapt the compression capacity and air flow d to the requirements d of an engine upgrade. A hybrid turbo is not defined solely by the appearance of its impeller: the consistency between the components, machining and settings is crucial.

MFS compressor wheel: standard or ‘ Performance ’?

MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This term describes its manufacturing process and does not, in itself, imply an increase in air flow d.

Performance A standard MFS impeller may retain a geometry equivalent to the original. A high-performance MFS impeller may utilise a diameter, profile or blade configuration tailored to the tuning objective, provided these characteristics are documented.

A standard MFS impeller can be just as glossy as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air. A higher flow rate can help to generate more power with appropriate engine tuning, though it does not in itself guarantee results.

Why does the geometry of the blades influence the air flow rate d?

The compressor impeller draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and the arrangement of its blades directly influence its aerodynamic behaviour.

A suitably designed geometry can move more air d under certain conditions. The result also depends on the compressor housing, the turbine section, the boost pressure and the engine tuning. An increase in diameter therefore does not automatically mean better performance across all operating ranges.

Reliability and balancing of the hybrid turbo

The 360° bearing stop, featured on all three stages offered, helps to distribute axial forces around the shaft. It must operate with correct lubrication and under the conditions specified by the engine modification.

Each configuration is balanced at high speed, up to 150,000 rpm, on a Cimat VSR balance bench. This balancing aims to limit vibrations and mechanical stresses on the rotor; however, it does not compensate for incorrect installation, contamination of the system or inadequate lubrication.

Engine remapping and tuning

The operation d of a hybrid turbocharger may require adjustments to the engine mapping and boost pressure management. Depending on the level of tuning, the fuel injection, intake air cooling d, exhaust system, clutch or transmission must also be checked or adjusted.

The wastegate must be adjusted during installation and when remapping the ECU. The result depends on the overall configuration and the settings chosen.

Turbo part numbers

OEM part numbers

89002080
1104102
11657796313
11657796314
7796314L12
GTB2260VK

Manufacturer’s part numbers

765985-0001
765985-5001S
765985-0003
765985-5003S
765985-0005
765985-5005S
765985-0006
765985-5006S
765985-0008
765985-5008S
765985-0010
765985-5010S

Compatible vehicles and assignments

Bmw
X5 (E70) — 211 hp
3.0 diesel — 02/2007 to 09/2008
Engine code : M57 D30 (306D3)
X5 (E70) — 211 hp
3.0 diesel — 10/2008 to 07/2013
Engine codes: M57 D30 (306D3) (.-03.10), N57
X5 (E70) — 235 hp
3.0 diesel — Dec 2006 to Sep 2008
Engine code : M57 D30 (306D3)
X5 (E70) — 235 hp
3.0 diesel — 10/2008 to 03/2010
Engine code : M57 D30 (306D3)

Additional technical specifications

Product type: turbo hybrid
Engine: Bmw 3.0D
displacement .: 3 0 litres
Fuel: diesel
Power outputs: 211 hp and 235 hp
Documented engine codes: M57 D30 (306D3), N57
Documented production periods: 12/2006 to 07/2013 depending on application

Fitting advice

⚠️ WARNING — IMPORTANT BEFORE INSTALLATION

Identify and rectify the cause of the previous fault before d installing the turbo. Check the lubrication system, the oil supply and return d as well as the cleanliness of all lines.

Check the intake and ensure there are no foreign objects present. Carry out the priming procedure in accordance with the applicable recommendations and follow the vehicle manufacturer’s instructions.

Failure to rectify a lubrication fault may result in the turbocharger failing again.

How do you identify the correct turbo?

Check the part number engraved on the original turbo d and compare it with the OEM and manufacturer part numbers in this data sheet. Also check the make, model, generation, engine type, power output at hp, installation dates and engine code.

An identical engine specification is not always sufficient to confirm compatibility, as there may be several different set-ups depending on the version or production period.

⚠️ Check your turbo’s part numbers

Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this data sheet. An identical engine specification does not always guarantee compatibility.

If in doubt, contact our team with the full part number of your original turbocharger d.

Product Details
HYB-400-996
Hybrid
Attachments
Download
COMPATIBLE PRODUCTS

Turbo: specialists in turbochargers since 2012

ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.

Find the right turbocharger for your engine

The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.

ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.

You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.

Turbo new, remanufactured, hybrid and Cartridge

Turbo new

Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.

View new turbochargers →

Turbo as remanufactured units

A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.

View standard exchange turbochargers →

Hybrid Turbo

Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.

View hybrid turbos →

Cartridge turbo

The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.

View turbo Cartridge →

for turbochargers for a wide range of applications

Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.

  • diesel and petrolcars;
  • commercial vehicles;
  • heavy goods vehicles and lorries;
  • construction and civil engineeringmachinery;
  • tractors and agricultural machinery;
  • boats and marine applications.

How do you identify the correct turbo part number?

A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.

Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.

Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.

Turbo failure: identify the cause before replacement

A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.

However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.

It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.

→ Identifying the symptoms d of a turbo failure

→ Understand the main causes of turbo failure d

ALFI TURBO, specialists in turbochargers since 2012

Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.

  • over 20,000 items in the catalogue;
  • over 5,500 new turbochargers in stock;
  • over 6,000 ‘ Cartridge ’ available;
  • new turbochargers, remanufactured units, hybrid units and Cartridge;
  • diesel and petrol engines;
  • a wide range of applications for road, agricultural, industrial and marine use;
  • fast delivery in France and across Europe;
  • warranty of up to 2 years depending on the product and applicable conditions.

BEFORE REPLACING A TURBO

A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.

Need d'help for finding your turbo?

Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.

CONTACT ALFI TURBO