- Online only
This hybrid turbo Stage 2 for engine variants 1.4 TB of 135, 136 and 140 hp is fitted with a high-flow MFS compressor wheel oversized, a casing d’a re-profiled intake and a 360° bearing stop’. It is designed to adjust the compression capacity and flow rate d’air, without announcing any final power figure that has not been documented.
The models listed include, in particular, the Abarth 500, 595 and 695, Alfa Romeo MiTo, Fiat 500X, Bravo II and Punto Evo, Jeep Compass and Renegade as well as the Lancia Delta III.
The wheel oversized and the re-profiling of the casing d’The intake components are designed to adapt the airflow to this new geometry’. The resulting performance also depends on the engine management system, the boost pressure and the vehicle’s overall configuration.
A hybrid turbo is based on a specially adapted turbocharger design for to receive internal changes. Depending on the specific application, these may relate to the compressor wheel, its dimensions and geometry, the casings, the turbine wheel, the thrust bearing system or even balancing.
On that note Stage 2, the components documented are the MFS compressor wheel oversized, the 8+0 configuration, the casing d’re-profiled intake, 360° stop and high-speed balancing’. The aim is d’adjust the compression capacity and flow rate’ dturbocharger air.
A hybrid turbocharger is not defined solely by the appearance of its impeller: the dimensions, geometry and compatibility of the associated components are crucial.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This designation describes the manufacturing process, but does not in itself guarantee an increase in flow rate dair.
A standard MFS wheel can retain a geometry equivalent to that d’origin’. An MFS wheel Performance can be designed with a geometry specific to the preparation, with a profile, diameter or blade arrangement tailored to the task. For this product, the available data indicates a wheel oversized 32.55 / 44.40 mm with an 8+0 configuration.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more dair. A higher flow rate can enable the engine to produce more power when combined with appropriate engine tuning.
The compressor wheel draws in and then compresses the air, which is then fed to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour and the amount dthe volume of air it can displace under certain conditions.
The result also depends on the compressor housing, the turbine section, the boost pressure and the engine tuning. A larger wheel therefore does not automatically guarantee better performance and may affect response time as well as the range doptimal use.
The documented 360° stop distributes axial forces over a circular surface. It helps to adapt the bearing system to operational stresses, without making the turbocharger insensitive to faults in assembly or lubrication.
The rotor is balanced at high speed, up to 150,000 rpm, on a Cimat VSR test bench. This balancing is intended to minimise vibrations and mechanical stresses, but is no substitute for correct installation or a circuit d’oil in good condition’.
The engine management system needs to be adjusted for make the most of the features of this hybrid turbo. Mapping, boost pressure, fuel supply, air cooling dThe intake, exhaust and, depending on the vehicle, the clutch or gearbox must be checked or adjusted.
The wastegate must be adjusted during the installation and remapping of the ECU. The hybrid turbo alone does not guarantee a power increase without the appropriate engine configuration.
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the supply and the return d’the oil and the cleanliness of the pipes’.
Check the intake and ensure there are no foreign objects. Carry out the priming in accordance with the relevant guidelines and follow the vehicle manufacturer’s instructions.
The wastegate must be adjusted during the installation and remapping of the ECU. Systems d’injection, dThe exhaust, cooling and engine management systems must be adapted to the desired level of tuning.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
Check the part number marked on the turbocharger d…the original and compare it with the OEM and manufacturer’s specifications in this data sheet. Also check the make, model, generation, body style, engine type and power output in hp, the assembly period and the engine code.
An identical engine does not always guarantee compatibility, as there may be several different configurations depending on the vehicle version.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d’origin’ using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you are in any doubt, please contact us with the full part number of your turbocharger and your vehicle details.
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO