- Online only
This hybrid turbocharger, designed for the Volkswagen Touareg 2.5 TDI with 174 hp, is available in three performance levels.. Each version features a high-flow MFS compressor wheel Performance, a 360° bearing stop and high-speed balancing on a Cimat VSR test bench.
Its design plug & play allows for Installation without modification of the original assembly d. However, to make full use of its characteristics, consistent engine preparation and appropriate adjustments are required.
This configuration combines a high-flow MFS impeller with a 360° thrust bearing. It is designed to adapt the compressor’s air displacement capacity d whilst retaining the dimensions specific to this stage.
oversized ’s impeller is accompanied by d ’s re-profiled intake housing d. These modifications adapt the air passage d and the compressor housing to the geometry of this stage.
This kit uses a larger impeller and a d intake housing that has been reshaped accordingly. Its performance depends on the overall engine configuration and the chosen boost settings.
A hybrid turbo utilises a turbocharger architecture adapted for to accommodate specific internal components. Depending on the modification, changes may involve the compressor wheel, its dimensions, the geometry of the blades, the housings, the thrust bearing or the balancing.
The aim is d to adapt the compression capacity and air flow rate d. A hybrid turbo is therefore not defined solely by the appearance of its impeller: the consistency between the components, machining and settings is crucial.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in airflow d. A standard MFS wheel can retain a geometry equivalent to that d of the original.
A standard MFS impeller can be just as shiny as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air. With appropriate engine tuning, a higher airflow can help to develop more power, although this alone does not guarantee results.
The compressor impeller draws in and then compresses the air admitted by the engine. Its diameter, profile, height, width and blade arrangement influence its aerodynamic behaviour. A suitable geometry can move more d air under certain conditions, but the result also depends on the housings, the turbine wheel, the boost pressure and the engine tuning. A larger wheel does not automatically guarantee better performance and may alter the response time.
The 360° bearing stop present on each stage helps to distribute the axial forces exerted on the rotating assembly. It does not replace d'proper lubrication or d'correct installation.
The rotor is balanced at high speed, up to 150,000 rpm, on a Cimat VSR test bench. This process aims to minimise vibrations and mechanical stresses, though it cannot compensate for a fault d'installation, contamination or a problem d'the oil supply.
The engine management system must be adapted for to make full use of the hybrid turbo’s characteristics. Depending on the level of tuning, the mapping, boost pressure, fuel injection, intake air cooling d, the exhaust and the transmission must be checked or adjusted. The wastegate must be adjusted during installation and when reprogramming the ECU. No power gain is automatic without a coherent configuration.
Touareg — 174 hp
Engine variants: 2.5 TDI — period unspecified
Engine code: not specified
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Before installation, identify and rectify the cause of the previous failure. Check the lubrication circuit, the oil supply and return lines d, the cleanliness of the pipes, and the intake, ensuring there are no foreign objects.. Prime the system in accordance with the applicable recommendations and follow the manufacturer’s instructions.. A lubrication fault that is not rectified may result in the turbocharger failing again.
Check the turbo’s part number d, the original OEM and manufacturer part numbers, as well as the make, model, generation, engine type, power output,Year and engine code.. An identical engine type does not always guarantee compatibility.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this specification sheet. An identical engine specification does not always guarantee compatibility.
If in doubt, please contact us with the part number found on your turbocharger.
Reference: AG20-885
Brand: ALFI TURBO ///
Year: Jan 2003 – May 2010Power: 174 hpdisplacement: 2461 cm³Engine code: Not specifiedWarranty: 2 years
Reference: wast
Brand: ALFI TURBO ///
Pneumatic control (wastegate) for turbo GARRETT HIH MHI KKK Toyota Brand new with a 2-year warranty. After placing your order, please let us know the exact part number of your turbo!
Reference: joints
Brand: ALFI TURBO ///
for Complete Gasket Set – for fitting your turbo.
Reference: ACG-358
Brand: ALFI TURBO ///
Year: January 2003 to May 2010Power: 163 and 174 hpdisplacement: 2.5 lEngine code: BAC, BPE, BLK, BPDWarranty: 2 years
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO