- Online only
This hybrid turbocharger, designed for the following engines Mitsubishi 2.5 TD 4D56-T, is available in three performance levels.. Each version combines an MFS compressor wheel Performance with a 360° bearing stop and high-speed balancing on a Cimat VSR test bench.
Documented applications include the Mitsubishi, L200 and Pajero Sport I with power outputs of 115 hp or 133 hp. The selected specification must correspond to the engine configuration and intended use.
This set-up is based on an MFS Performance impeller, the geometry of which is designed to match the air flow rate d. Its performance also depends on the boost setting and the associated engine tuning.
The larger impeller diameter requires re-profiling of the intake casing d. This combination adapts the air passage d to the new geometry, though it does not in itself guarantee a specific power output.
This version features the largest compressor wheel documented for for this product, as well as a modified intake housing d. Such modifications may alter the air flow rate d, response time and the range d within which the turbocharger operates optimally.
A hybrid turbo retains an architecture suited to the vehicle whilst incorporating modified internal components. Depending on the modification, changes may involve the compressor wheel, its dimensions and geometry, the machining of the housings, the thrust bearing or d'other components of the rotor.
The aim is d to adapt the compression capacity and the air flow rate d. A hybrid turbo is therefore not defined solely by the appearance of its impeller: consistency between the components, machining and balancing is essential.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in airflow d. A standard MFS wheel may retain a geometry equivalent to that d of the original.
An MFS impeller Performance can feature a geometry, diameter, profile or blade configuration tailored to the tuning objective. A standard MFS impeller can be just as shiny as an MFS impeller Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d air.
Higher airflow can enable the engine to produce more power when combined with appropriate engine tuning, though this does not guarantee an automatic performance gain.
The compressor impeller draws in and then compresses the air sent to the engine. Its diameter, profile, height, width and the arrangement of its blades influence its aerodynamic behaviour. A suitable geometry can move more d air under certain operating conditions.
The result also depends on the compressor housing, the turbine section, the boost pressure and the engine settings. A larger impeller is not automatically preferable in all situations and may affect response time.
The 360° thrust bearing, documented at each stage, distributes axial forces over a wide surface area. It must, however, operate with correct lubrication and under suitable pressure conditions.
The rotor is balanced at high speed, up to 150,000 rpm, on a Cimat VSR test bench. This process helps to limit vibrations and mechanical stresses, but does not compensate for faulty assembly, inadequate lubrication or the presence d of a foreign object.
Adjustments to the mapping and boost pressure management may be necessary for make the most of the hybrid turbo’s characteristics. The wastegate must be adjusted during the installation and remapping of the ECU.
Depending on the level of tuning, the injection system, fuel supply, exhaust system, air cooling d'intake, clutch or gearbox must also be checked and, if necessary, adjusted. The hybrid turbo alone does not guarantee a power increase.
⚠️ WARNING — IMPORTANT BEFORE INSTALLATION
Identify and rectify the cause of the previous fault before fitting the turbo. Check the lubrication system, the oil supply and return d as well as the cleanliness of the pipes.
Check the intake and ensure there are no foreign objects present. Carry out the priming procedure in accordance with the applicable recommendations and follow the manufacturer’s instructions.
The wastegate, boost pressure and engine management must be adjusted according to the chosen set-up. A lubrication fault that is not rectified may result in the turbocharger failing again.
Note down the reference number engraved on the original turbo d, then compare it with the OEM and manufacturer references in this data sheet.. Also check the make, model, generation, body style, engine type, power output at hp, production period and engine code.
An identical engine specification is not always sufficient to confirm compatibility, as different set-ups may have been used depending on the version or production period.
⚠️ Check your turbo’s part numbers
Before ordering, compare the part number marked on your original turbo d with the part numbers listed in this specification sheet. An identical engine specification does not always guarantee compatibility.
If you are unsure about the fitment, please contact us with the part number and your vehicle details.
Reference: AM35-526
Brand: ALFI TURBO ///
Year: 09/2001 – 12/2007Power: 115 hpdisplacement: 2,477 cm³Engine code: Not specifiedWarranty: 2 years
Reference: ACM-109
Brand: ALFI TURBO ///
Year: From 2001 or 2002, depending on the applicationPower: 115 and 133 hpdisplacement: 2,.,5 LEngine code: Not specifiedWarranty: 2 years
Reference: wast
Brand: ALFI TURBO ///
Pneumatic control (wastegate) for turbo GARRETT HIH MHI KKK Toyota Brand new with a 2-year warranty. After placing your order, please let us know the exact part number of your turbo!
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO