- Online only
This hybrid turbo has been tuned for engines 1.9 dCi, , DI-D, DTI, DI, , TDCI and TDI listed in the posts below. It incorporates an MFS compressor wheel Performance high-throughput, a 360° bearing stop and high-speed balancing on a Cimat VSR bench.
Three levels of preparedness are documented. When choosing a course, consideration must be given to the vehicle, its intended use and any modifications made to the engine management system and peripheral systems.
This setup uses an MFS wheel Performance whose geometry is designed to adjust the flow rate d'compressor air'. Its final behaviour depends on the engine’s configuration and its electronic control system.
The wheel oversized requires the casing to be re-profiled d'admission'. Increasing its dimensions may affect flow capacity and response time; it must therefore be incorporated into a coherent engine tuning programme.
This test rig accommodates the largest compressor wheel of the three documented configurations. A larger displacement alone does not guarantee better performance in all conditions: the result depends on the engine as a whole, the turbocharger settings and the intended use.
A hybrid turbo is based on a specially adapted turbocharger design for to receive internal components or machined parts that differ from the specification d'origin'. Depending on the modification, changes may relate to the compressor impeller, its dimensions and geometry, the casings, the turbine impeller, the thrust bearing system or the balancing.
The aim is d'adjust the compression capacity and flow rate' d'air'. A hybrid turbocharger is not defined solely by the appearance of its impeller: its dimensions, its aerodynamic profile and the overall coherence of the unit are crucial.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This term describes a manufacturing process and does not, in itself, guarantee an increase in throughput d'air'.
A standard MFS wheel can retain a geometry equivalent to that d'origin'. An MFS wheel Performance may use a blade geometry, profile, diameter or configuration suited to the purpose of the preparation.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air'. A higher flow rate can help to generate more power when the engine and its control system are set up accordingly, although this does not in itself guarantee a performance gain.
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of its blades influence the aerodynamic behaviour of the compressor. The right geometry can move more d'air within certain operating ranges'.
The result also depends on the compressor housing, the impeller and the turbine housing, the boost pressure and the engine tuning. A larger wheel may affect response time and range d'optimal use; it is therefore not automatically the best option' for all uses.
The three work placements offer d'a 360° bearing stop, designed for to distribute axial forces over a large area. His presence does not exempt him from d'proper lubrication or compliance with the installation requirements'.
Each configuration is balanced at high speed, up to 150,000 rpm on a Cimat VSR test bench. This balancing is designed to minimise vibrations and mechanical stresses on the rotor, but does not protect against incorrect installation, contamination or a fault d'oil supply'.
Making use of characteristics d'A hybrid turbo may require adjustments to the engine mapping and boost pressure control'. Depending on the stage of preparation, injection, air cooling d'The intake, exhaust, clutch or transmission must also be checked or adjusted'.
The wastegate must be adjusted during the fitting and remapping of the ECU. A hybrid turbo does not automatically guarantee a power increase without consistent tuning of the entire system.
Engine codes: not specified for these assignments.
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the supply and the return d'the oil and the cleanliness of all the pipes'.
Check the intake and ensure there are no foreign objects present. Carry out the priming in accordance with the relevant guidelines and follow the vehicle manufacturer’s instructions.
The wastegate and boost management must be set in line with the engine mapping. Systems d'injection, d'The exhaust and cooling systems must be checked depending on the level of preparation'.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
First of all, check the reference number engraved or marked on the turbo d'original', then compare it with the OEM and manufacturer part numbers listed on this sheet. Also check the make, model, generation, engine type and power output in hp and theYear assembly.
The same engine can be fitted with several different turbo set-ups. The engine code should also be checked where it is available on the vehicle or in its documentation.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d'origin' using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you are in any doubt, please contact us with the full part number of your turbocharger d'Vehicle origin and details'.
Reference: AG15-043
Brand: ALFI TURBO ///
Year: September 2000 to June 2006Power: 80, 100 and 102 hpdisplacement: 1.9Engine code: F9Q1Warranty: 2 years
Reference: ACG-008
Brand: ALFI TURBO ///
Year: From 1995 onwards, depending on the application; end date not specifiedPower: 80, 82, 100, 102, 105 and 107 hp depending on the applicationdisplacement: 1.9Engine code: Not specifiedWarranty: 2 years
Reference: wast
Brand: ALFI TURBO ///
Pneumatic control (wastegate) for turbo GARRETT HIH MHI KKK Toyota Brand new with a 2-year warranty. After placing your order, please let us know the exact part number of your turbo!
Reference: joints
Brand: ALFI TURBO ///
for Complete Gasket Set – for fitting your turbo.
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO