- Online only
- On sale!
This hybrid turbo for diesel engines 1.9 is available in three levels of preparation. Each configuration uses an MFS compressor wheel Performance high flow rate, a 360° bearing stop and high-speed balancing.
The documented assignments relate in particular to Alfa Romeo 159, Fiat Croma, Grande Punto and Sedici, as well as the Suzuki SX4. Compatibility must be confirmed using the turbo’s part number d'origin'.
This modification alters the compressor wheel so that d'adjust the flow rate' d'air whilst retaining the documented dimensions' for this work placement. Its operation depends on the engine’s configuration and its electronic control system.
The wheel oversized is accompanied by d'reprofiling the casing' d'admission'. This modification is designed to accommodate the new geometry correctly and to adjust the travel capacity d'compressor air'.
This configuration is fitted with a wheel of specific dimensions and geometry, with a housing d'adapted admission'. However, a larger wheel is not automatically an improvement in all conditions: the answer depends on the overall set-up.
A hybrid turbo relies on a specially adapted design for to receive internal changes. Depending on the specific application, these may relate to the compressor wheel, its dimensions, the geometry of the blades, the machining of the housings, the thrust bearing or the balancing.
The aim is d'adjust the compression capacity and flow rate' d'air'. A hybrid turbo is therefore not defined solely by the appearance of its compressor wheel, but by the consistency of its components and their settings.
MFS stands for ‘Milled From Solid’: the wheel is machined from a solid block. This manufacturing process does not, on its own, guarantee an increase in throughput d'air'. A standard MFS wheel can retain a geometry equivalent to that d'origin'.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air'. With the right engine tuning, a higher flow rate can help to increase power output, although this does not guarantee a specific result.
The compressor wheel draws in and then compresses the air. Its diameter, profile, height, width and the arrangement of its blades all influence its aerodynamic behaviour. The result also depends on the casings, the turbine, the boost pressure and the engine tuning. An increase in size may also affect the response time and range d'optimal use'.
The documented 360° stop helps to distribute axial forces. Rotor balancing at 150,000 rpm on a Cimat VSR test bench is designed to minimise vibrations and mechanical stresses. These features do not compensate for a lack of lubrication, contamination or incorrect installation.
The engine management system needs to be adjusted for make the most of the hybrid turbo’s features. Mapping, boost pressure and wastegate adjustment must be checked during installation and remapping. Depending on the level of preparation: fuel injection, exhaust, air cooling d'The intake, clutch or gearbox may also need to be checked or adjusted'.
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Identify and rectify the cause of the previous fault before d'fit the turbo'. Check the lubrication circuit, the supply and the return d'the oil and the cleanliness of the pipes'.
Check the intake and ensure there are no foreign objects present. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions. The wastegate and engine management system need to be adjusted for the chosen preparation.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
Check the turbo part number d'origin, OEM and manufacturer part numbers, make, model, generation, body style, engine type, power output, production period and engine code'. Having the same motor does not always guarantee compatibility.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d'origin' using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If in doubt, please contact us, quoting the reference number clearly visible on your turbo’s nameplate.
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO