Hybrid Turbo 1.9 JTD/JTDM 150 and 170 hp – 55205370, 760497-2

  • Online only
Hybrid
Hybrid Turbo 1.9 JTD JTDM 150 170 hp, 55205370, 55200925, 71793947, 71792879, 71724097, 55214063, 760497-2, 777250-1
  • Hybrid Turbo 1.9 JTD JTDM 150 170 hp, 55205370, 55200925, 71793947, 71792879, 71724097, 55214063, 760497-2, 777250-1
  • turbo   Turbo Alfa Romeo GT 1.9 JTD 150 55205370 55214063 71792879 760497-0001 760497-0002  760497 777250
HYB-300-996
Year: November 2003 to December 2014, depending on assignment
Power: 150 and 170 hp
displacement: 1,.,9
Engine code: 937 A5.000, 937 A6.000
Exchange
Gasket kit
Preparation course
€403.20 VAT included

336 tax excl.

Quantity
Manufacturing time: 15-20 working days

Description

This hybrid turbo for diesel engines 1.9 JTD and JTDM is available in three levels of preparation. Each course combines a high-flow MFS compressor wheel with a 360° bearing stop and high-speed balancing on a Cimat VSR bench.

The documented assignments relate to several Alfa Romeo 147, 156 and GT, as well as the Fiat Bravo II and Stilo 150 or 170 hp. Compatibility must be confirmed using the turbo’s part number d'origin'.

Available products — Stage 1, Stage 2 and Stage 2+

Stage 1
Compressor wheel: High-capacity MFS
Dimensions: 34.66 / 49.00 mm
Blade configuration: 6+6
Stop: 360° bearing
Balancing: 150,000 rpm on a Cimat VSR test bench

This system uses a high-flow MFS impeller with documented dimensions in order to d'adjust the compression capacity'. Its ultimate performance depends on the engine management system and the overall mechanical configuration.

Stage 2
Compressor wheel: High-capacity MFS oversized
Dimensions: 41.58 / 56.03 mm
Blade configuration: 7+7
Carter d'Admission:' reprofiled for to receive the wheel oversized
Stop: 360° bearing
Balancing: 150,000 rpm on a Cimat VSR test bench

The larger-diameter wheel requires the casing to be re-profiled in this instance d'admission'. This organisation aims to change the flow rate d'available air, whilst being able to influence the turbocharger’s response depending on the conditions' d'use'.

Stage 2+
Compressor wheel: High-capacity MFS oversized
Dimensions: 47.00 / 60.00 mm
Blade configuration: 8+0
Carter d'Admission:' reprofiled for to receive the wheel oversized
Stop: 360° bearing
Balancing: 150,000 rpm on a Cimat VSR test bench

This course uses the largest Ferris wheel on record for this unit, with a specific blade configuration and a casing d're-profiled intake'. However, a higher dimension alone is not enough to determine the outcome: the overall effectiveness of the preparation remains essential.

What is a hybrid turbo ?

A hybrid turbo is based on a specially adapted turbocharger design for to receive internal changes. Depending on the specific application, these may relate to the compressor wheel, its dimensions, the geometry of its blades, the machining of the casings, the thrust bearing or the balancing.

The aim is d'adjust the compression capacity and flow rate' d'air to meet the requirements of the preparation'. A hybrid turbocharger is therefore not defined solely by the appearance of its impeller, but by the consistency of its mechanical characteristics.

MFS compressor wheel: standard or Performance ? ?

MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This term describes the manufacturing process, but does not in itself mean that the wheel moves further d'air'.

A standard MFS wheel can retain a geometry equivalent to that d'origin'. An MFS wheel Performance may use a blade diameter, profile or configuration suited to the preparation objective, provided that these characteristics are documented.

A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more d'air'. A higher flow rate can help to increase power output when the engine has been properly tuned.

Why does the geometry of the blades affect the flow rate? d'air?' ?

The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of the blades influence its aerodynamic behaviour and the amount d'the amount of air it can move under certain conditions'.

The result also depends on the compressor housing, the impeller and the turbine housing, the boost pressure and the engine tuning. A larger wheel may affect response time and range d'optimal use; it is therefore not automatically the best option in all situations'.

Reliability and balancing of the hybrid turbocharger

The 360° bearing stop, as covered in the three training courses, helps to distribute the axial forces around the axis. This must be combined with proper lubrication and correct installation.

Each preparation is balanced at high speed, up to 150,000 rpm, on a Cimat VSR test bench. The aim of this operation is to minimise vibrations and stresses in the rotor, without compensating for a fault d'installation, contamination or insufficient oil supply'.

Engine remapping and tuning

The farm d'A hybrid turbo may require adjustments to the engine mapping and boost pressure control'. Depending on the course and the vehicle, the fuel supply and air cooling d'The intake, exhaust, clutch or transmission may also need to be checked or adjusted'.

The wastegate must be adjusted during the fitting and remapping of the ECU. A hybrid turbo does not automatically result in a performance gain without proper preparation of the entire engine system.

Turbo part numbers

OEM part numbers

55205370
55200925
71793947
71792879
71724097
55214063

Manufacturer’s part numbers

760497-2
760497-2002
760497-5002S
777250-0001
777250-1
777250-2001
777250-5001S
777250-5002S

Compatible vehicles and assignments

Alfa Romeo
147 (937_) — 150 hp
Diesel 1.9 JTD/JTDM • September 2004 to March 2010
Engine code : 937 A5.000
147 (937_) — 170 hp
Diesel 1.9 JTD/JTDM • June 2008 to March 2010
Engine code : 937 A6.000
156 (932_) — 150 hp
Diesel 1.9 JTD/JTDM • July 2004 to September 2005
Engine code : 937 A5.000
156 Sportwagon (932_) — 150 hp
Diesel 1.9 JTD/JTDM • July 2004 to May 2006
Engine code : 937 A5.000
GT (937_) — 150 hp
Diesel 1.9 JTD/JTDM • November 2003 to September 2010
Engine code : 937 A5.000
GT (937_) — 170 hp
Diesel 1.9 JTD/JTDM • May 2008 to September 2010
Engine code : 937 A6.000
Fiat
Bravo II (198_) — 150 hp
Diesel 1.9 JTD/JTDM • April 2007 to December 2014
Engine code : 937 A5.000
Stilo (192_) — 150 hp
Diesel 1.9 JTD/JTDM • September 2005 to November 2006
Engine code : 937 A5.000
Stilo Multi Estate (192_) — 150 hp
Diesel 1.9 JTD/JTDM • September 2005 to August 2008
Engine code : 937 A5.000
Stilo Van (192_) — 150 hp
Diesel 1.9 JTD/JTDM • September 2005 to August 2008
Engine code : 937 A5.000

Additional technical specifications

Product type: hybrid turbo
Engine: 1.9 JTD / JTDM
Fuel: diesel
Documented power ratings: 150 and 170 hp
Engine codes: 937 A5.000, 937 A6.000
Installation: plug & play, with no documented changes to the layout

Assembly instructions

⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY

Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the supply and the return d'the oil and the cleanliness of all the pipes'.

Check the intake and ensure there are no foreign objects present. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions. The wastegate must be adjusted during the installation and tuning of the engine management system.

If a lubrication fault is not rectified, it may lead to the turbocharger failing again.

How do you choose the right turbo ?

Check the part number on the turbocharger d'origin', then compare the OEM and manufacturer part numbers. Also check the make, model, generation, body style, engine type and power output in hp, the assembly period and the engine code. Having the same engine is not always enough to confirm compatibility.

⚠️ Check your turbo’s part numbers

Before placing your order, Compare the part number on your turbocharger d'origin' using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.

If you’re unsure, please contact us with the reference number clearly visible on your turbo d'Vehicle origin and details'.

Product Details
HYB-300-996
0
Hybrid
Attachments
Download
COMPATIBLE PRODUCTS

Turbo: specialists in turbochargers since 2012

ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.

Find the right turbocharger for your engine

The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.

ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.

You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.

Turbo new, remanufactured, hybrid and Cartridge

Turbo new

Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.

View new turbochargers →

Turbo as remanufactured units

A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.

View standard exchange turbochargers →

Hybrid Turbo

Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.

View hybrid turbos →

Cartridge turbo

The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.

View turbo Cartridge →

for turbochargers for a wide range of applications

Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.

  • diesel and petrolcars;
  • commercial vehicles;
  • heavy goods vehicles and lorries;
  • construction and civil engineeringmachinery;
  • tractors and agricultural machinery;
  • boats and marine applications.

How do you identify the correct turbo part number?

A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.

Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.

Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.

Turbo failure: identify the cause before replacement

A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.

However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.

It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.

→ Identifying the symptoms d of a turbo failure

→ Understand the main causes of turbo failure d

ALFI TURBO, specialists in turbochargers since 2012

Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.

  • over 20,000 items in the catalogue;
  • over 5,500 new turbochargers in stock;
  • over 6,000 ‘ Cartridge ’ available;
  • new turbochargers, remanufactured units, hybrid units and Cartridge;
  • diesel and petrol engines;
  • a wide range of applications for road, agricultural, industrial and marine use;
  • fast delivery in France and across Europe;
  • warranty of up to 2 years depending on the product and applicable conditions.

BEFORE REPLACING A TURBO

A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.

Need d'help for finding your turbo?

Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.

CONTACT ALFI TURBO