- Online only
This hybrid turbo for engine options Chevrolet 1.7 VCDi and Opel 1.7 CDTI is available at three levels of difficulty. Depending on the course chosen, he receives an MFS compressor wheel Performance high flow rate, a 360° bearing stop and high-speed balancing.
The documented assignments relate in particular to Chevrolet Cruze and Trax, as well as the Opel Astra J, Corsa D, Meriva B and Mokka. Compatibility must always be confirmed using the turbo’s part number d’origin’.
This setup uses an MFS wheel Performance designed to regulate the flow rate d’air whilst retaining the documented dimensions for this work placement. The 360° stop helps to distribute axial forces.
The larger diameter of the wheel requires the casing to be re-profiled d’admission’. This organisation aims to increase transport capacity d’air under suitable conditions, without this in itself constituting a guarantee of final power.
This workshop houses the largest wheel documented on this sheet, complete with a casing d’adapted admission’. Its behaviour depends on the overall engine set-up, and a larger wheel alone does not guarantee better performance in all conditions.
A hybrid turbo is based on a turbocharger design that has been adapted to accommodate specific internal components. Depending on the design, modifications may relate to the compressor wheel, its dimensions, the geometry of the blades, the machining of the housings, the thrust bearing or the balancing.
The aim is d’adjust the compression capacity and flow rate’ dair. A hybrid turbocharger is therefore not defined solely by the appearance of its compressor wheel, but by the consistency of its mechanical characteristics.
MFS stands for ‘Milled From Solid’, meaning a wheel machined from a solid block. This manufacturing process alone does not guarantee an increase in throughput dair. A standard MFS wheel can retain a geometry equivalent to that d’origin’.
A standard MFS wheel can be just as shiny as an MFS wheel Performance. It is not its appearance that determines its performance, but its geometry and its ability to move more dair. An MFS wheel Performance can be fitted with blades of a specific profile, dimensions or configuration suited to the preparation task. A higher flow rate can help to increase power output when the engine management system and components are correctly matched.
The compressor wheel draws in and then compresses the air fed to the engine. Its diameter, profile, height, width and the arrangement of the blades influence its aerodynamic behaviour and its ability to move air, depending on the operating conditions.
The result also depends on the compressor housing, the turbine section, the boost pressure and the engine tuning. An increase in diameter may affect the response time and the range doptimal use; it therefore does not automatically guarantee a better result.
The 360° bearing stop, as covered in the three training courses, distributes axial forces over a wide surface area. It helps to adapt the bearing system to operational stresses, without making the turbocharger immune to poor lubrication or incorrect installation.
Each batch is balanced at high speed, at 150,000 rpm, on a Cimat VSR test bench. Balancing is designed to minimise vibrations and mechanical stresses on the rotor.
It may be necessary to adjust the engine mapping and boost pressure control for make the most of the hybrid turbo’s features. Depending on the level of preparation: fuel injection, exhaust, air cooling d’The intake, clutch or gearbox must also be checked’. The wastegate must be adjusted during the installation and remapping of the ECU. No increase in power is automatic without the right configuration.
⚠️ WARNING — IMPORTANT BEFORE ASSEMBLY
Before installation, identify and rectify the cause of the previous fault. Check the lubrication circuit, the supply and the return d’the oil and the cleanliness of all the pipes’.
Check the intake and ensure there are no foreign objects present. Carry out the priming in accordance with the relevant guidelines and follow the manufacturer’s instructions. The wastegate and engine management system must be set in line with the chosen tuning package.
If a lubrication fault is not rectified, it may lead to the turbocharger failing again.
Check the part number marked on the turbocharger d…the original and compare it with the OEM and manufacturer’s specifications in this data sheet. Also check the make, model, generation, body style, engine type and power output in hp, the years of manufacture and the engine code. Having the same motor does not always guarantee compatibility.
⚠️ Check your turbo’s part numbers
Before placing your order, Compare the part number on your turbocharger d’origin’ using the references given in this fact sheet. Having the same motor does not always guarantee compatibility.
If you are in any doubt, please contact us, quoting the reference number clearly visible on your turbocharger.
ALFI TURBO specialises in the sale of turbochargers for for cars, commercial vehicles, heavy goods vehicles, construction machinery, agricultural machinery and boats: new turbochargers, remanufactured units, hybrid turbochargers, Cartridge and turbocharger spare parts. Over 20,000 items are available.
The turbocharger plays a vital role in the operation and performance d of a turbocharged engine. When a turbocharger needs replacing, it is important d to identify the exact part number before ordering.
ALFI TURBO supplies turbochargers for for a wide range of makes and engine types: cars, commercial vehicles, heavy goods vehicles, construction machinery, tractors and agricultural machinery, as well as various marine applications.
You can search for your turbo based on the vehicle or application, engine type, engine code, or directly using d an OEM or manufacturer part number found on your old turbocharger.
Browse our range of new turbochargers for for diesel and petrol engines. ALFI TURBO has over 5,500 new turbochargers in stock for covering a wide range of makes, engine types and turbocharger part numbers.
View new turbochargers →A standard exchange turbo allows you to replace a turbocharger whilst returning the old part where a deposit is required. Our catalogue includes numerous part numbers for from various makes and engine types.
View standard exchange turbochargers →Hybrid turbos are designed for set-ups requiring greater air flow d and higher performance potential than a standard set-up. Specifications depend on the turbo, its tuning and the engine configuration.
View hybrid turbos →The turbo Cartridge, also known as the central turbo cartridge, comprises the main rotating components of the turbocharger. ALFI TURBO has over 6,000 Cartridge for turbo part numbers.
View turbo Cartridge →Our catalogue covers a wide range of d applications fitted with d a turbocharged engine.
A single engine type may have been fitted with several different turbochargers depending on theYear, power output, engine version or technical evolution.. The application alone is therefore not always sufficient for to accurately identify the correct turbo.
Before ordering, note down the part numbers shown on the identification plate d of your old turbocharger. This may be d an OEM part number or d a part number from the turbo manufacturer.
Compare these part numbers with those listed on our product pages.. If in doubt, our team can help you verify the part number you are looking for before you place your order.
A loss of power, an unusual whistling noise, oil consumption d, abnormal smoke or poor engine performance may be linked to a turbocharger fault.
However, a fault that appears to be turbo-related may also stem d from a lubrication issue, d from contaminated oil, d from a foreign object, from the intake or exhaust systems, or d from another engine peripheral component.
It is therefore important to investigate the cause of the fault before fitting a new turbo or a new Cartridge.
Since 2012, ALFI TURBO has been assisting private individuals and professionals in identifying and replacing turbochargers.
A turbocharger failure may be the result d of another engine problem. Before fitting d a new turbo or Cartridge, identify and rectify the cause of the original fault to d avoid d damaging the new part.
Do you have a turbocharger part number but can’t find the matching part? Are you unsure which part number to choose? Send us the details from your old turbo so that our team can help you identify the part you’re looking for.
CONTACT ALFI TURBO